START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
Rotor Blades R/C Helicopter Rotor Blade Discussions |
|
LinkBack | Thread Tools | Display Modes |
09-04-2017, 08:39 PM | #1 (permalink) |
Registered Users
Join Date: Oct 2005
|
Spin Blade Help
Help!! I have 720 spin blades and one of the 6mm OD blade bolt spacers are missing, I contacted Experence RC where I bought them and the said they can't help.
Can someone please help |
Sponsored Links | |||
Advertisement |
|
09-05-2017, 09:35 AM | #2 (permalink) |
Registered Users
Join Date: Nov 2012
|
Make a new one?
__________________
Jonas OMPHOBBY M7, M4, M2 EVO & M1 EVO Designing things for Fun-Key RotorTech & OMPHOBBY |
09-20-2017, 05:06 PM | #3 (permalink) |
Registered Users
Thread Starter
Join Date: Oct 2005
|
I can't find any stock material, very frustrated. Please help
|
09-24-2017, 02:14 AM | #4 (permalink) |
CHC Benefactor
Join Date: Feb 2006
Location: Singapore
|
I thought I might have some but unfortunately they're 5mm OD.
__________________
Playing with gravity one heli at a time Dancing with gravity one flight at a time |
09-27-2017, 11:52 AM | #6 (permalink) |
CHC Benefactor
Join Date: Feb 2006
Location: Singapore
|
I checked the Logo Xxtreme 800, it has 5mm with the original Edge blades.
__________________
Playing with gravity one heli at a time Dancing with gravity one flight at a time |
12-31-2017, 11:38 PM | #7 (permalink) |
Registered Users
Thread Starter
Join Date: Oct 2005
|
Got a hold of Spin Blade Germany, they said Expereance RC will have the part...expereance said the y eather can't or won't . Now what?!
|
01-01-2018, 03:01 AM | #8 (permalink) |
CHC Benefactor
Join Date: Feb 2006
Location: Singapore
|
Please give ID and OD for spacer and confirm it’s the copper cylinder you are referring to. I have some SAB speed blades of the same length that i might be able to scrounge something off of. I’ll check again later. Unfortunately I think all my spins are 600 and below. Probably tossed the crashed 700’S.
__________________
Playing with gravity one heli at a time Dancing with gravity one flight at a time |
01-01-2018, 01:10 PM | #9 (permalink) |
CHC Benefactor
Join Date: Feb 2006
Location: Singapore
|
Sorry, no luck with SAB speed 720's. Also 4mm ID inserts.
__________________
Playing with gravity one heli at a time Dancing with gravity one flight at a time |
01-01-2018, 01:31 PM | #10 (permalink) |
Registered Users
Join Date: Feb 2015
|
That's shotty customer service imho. Experience should let you exchange them for a new set
__________________
Mini Protos 6s stretch/XK K110/Trex 450sport v2 fbl/Rochobby Nemesis NXT/RareBear funfighter620mm ~Problem Child~ |
01-03-2018, 09:15 PM | #11 (permalink) |
Registered Users
Thread Starter
Join Date: Oct 2005
|
Germany has the part $6 but Exsperence has so order them from what I understand.
|
01-15-2018, 07:50 PM | #13 (permalink) |
Registered Users
|
in case you are looking for the spaces 6 mm -> 5 mm. Why not taking some 5 mm bullet connectors. Most of their outer diameter is 6 mm. Easy to cut the off and you get your inexpensive 6-5 mm spacer for the blades
__________________
Kontronik, Switch Blades, Bavarian Demon, TDR, TDF, Diabolo, HeliBaby, Takumi and Banshee |
Thread Tools | |
Display Modes | |
|
|