Fun, Learning, Friendship and Mutual Respect START  HERE


Unregistered
Go Back   HeliFreak > R/C Helicopter Support > Blade Helicopters (eFlite) > 300CFX


300CFX Blade 300CFX Helicopters Information and Help


Like Tree5Likes
Reply
 
LinkBack Thread Tools Display Modes
Old 04-08-2018, 11:43 AM   #21 (permalink)
Registered Users
 
Posts: 8,989
Thread Starter Thread Starter
 

Join Date: Feb 2013
Location: Fargo ND
Default

If you want Mine from the Turnigy motor...you can have it (12T and 13T)

I used the slant pinion and main gear

Just PM your address
__________________
nCPX(3)*mCPX(30)*130X(10)*130X-L(6)*180CFX(3)*300X/CFX(3)
450X(7)*470LP*GauiX3*nanoQX*180QX*DX9*HF180060*AMA 988253
JonJet is online now        Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 04-09-2018, 06:24 AM   #22 (permalink)
Registered Users
 

Join Date: Feb 2016
Default

Quote:
Originally Posted by JonJet View Post
If you want Mine from the Turnigy motor...you can have it (12T and 13T)

I used the slant pinion and main gear

Just PM your address
Awesome off Jon. Address sent.
__________________
Blade Nano CPS, Blade 180CFX, Blade 130S, Blade 230S, Trex 450L, Vortex 150, DX8 G2, Phoenix Sim
irob is offline        Reply With Quote Quick reply to this message
Old 04-13-2018, 07:56 AM   #23 (permalink)
Registered Users
 

Join Date: Feb 2016
Default

Thanks Mike. I did get the pinions from Jon yesterday. Bookmarked the links you sent.
__________________
Blade Nano CPS, Blade 180CFX, Blade 130S, Blade 230S, Trex 450L, Vortex 150, DX8 G2, Phoenix Sim
irob is offline        Reply With Quote Quick reply to this message
Old 04-13-2018, 08:11 AM   #24 (permalink)
Registered Users
 

Join Date: Feb 2016
Default

OK, got the pinions from Jon, thanks. It's a mystery where in the World the Mystery Motor is. I didn't pay for tracking. I've bought from China and Vietnam before so I know it will probably be a couple of weeks.

I hope it does quiet the 300 down. Looking forward to a different motor.

Thanks for the help in getting away from the stock motor guys.
__________________
Blade Nano CPS, Blade 180CFX, Blade 130S, Blade 230S, Trex 450L, Vortex 150, DX8 G2, Phoenix Sim
irob is offline        Reply With Quote Quick reply to this message
Old 04-13-2018, 08:32 AM   #25 (permalink)
Registered Users
 
Posts: 2,928
 

Join Date: Mar 2014
Default

Any good 4s motor for this heli?
__________________
Brandon Chew aka ~INDO~
Team Lynx / Oxy Heli
Oxy 2, 3, 4, 4Max, 5
plus many others 420 and under
Indokast is offline        Reply With Quote Quick reply to this message
Old 04-13-2018, 09:05 AM   #26 (permalink)
Registered Users
 

Join Date: Feb 2007
Location: England
Default

Quote:
Originally Posted by irob View Post
I hope it does quiet the 300 down. Looking forward to a different motor.
I have 2 300 CFX's and they are both very noisy - I think that part of it is the hard plastic gear, and a high kV motor probably doesn't help...
Mikej is offline        Reply With Quote Quick reply to this message
Old 04-13-2018, 10:17 AM   #27 (permalink)
Registered Users
 
Posts: 8,989
Thread Starter Thread Starter
 

Join Date: Feb 2013
Location: Fargo ND
Default

The slant gear helps...but the 300X is a noisy model

Kinda like the ankle-bitter puppy who thinks he's a doberman
irob likes this.
__________________
nCPX(3)*mCPX(30)*130X(10)*130X-L(6)*180CFX(3)*300X/CFX(3)
450X(7)*470LP*GauiX3*nanoQX*180QX*DX9*HF180060*AMA 988253
JonJet is online now        Reply With Quote Quick reply to this message
Old 04-13-2018, 10:23 AM   #28 (permalink)
Registered Users
 
Posts: 8,989
Thread Starter Thread Starter
 

Join Date: Feb 2013
Location: Fargo ND
Default

Quote:
Originally Posted by Indokast View Post
Any good 4s motor for this heli?
I have the 4S Lynx in a stock frame/Lynx motor mount...

And the Lynx 6S in a MicroHeli CF frame

I'm building up another 300CFX using a Lynx frame and put a stock 450X motor in that one...

Simply because the Lynx mounts are nowhere to be found
Indokast likes this.
__________________
nCPX(3)*mCPX(30)*130X(10)*130X-L(6)*180CFX(3)*300X/CFX(3)
450X(7)*470LP*GauiX3*nanoQX*180QX*DX9*HF180060*AMA 988253
JonJet is online now        Reply With Quote Quick reply to this message
Old 04-13-2018, 10:41 AM   #29 (permalink)
Registered Users
 
Posts: 2,928
 

Join Date: Mar 2014
Default

I miss the days when lynx was in full production for these now older blade models.

They were the best birds to customize. new helis about all look the same minus blades and canopies. blade models had the most canopy options too without custom ordering one.
__________________
Brandon Chew aka ~INDO~
Team Lynx / Oxy Heli
Oxy 2, 3, 4, 4Max, 5
plus many others 420 and under
Indokast is offline        Reply With Quote Quick reply to this message
Old 04-13-2018, 10:53 AM   #30 (permalink)
Registered Users
 
Posts: 8,989
Thread Starter Thread Starter
 

Join Date: Feb 2013
Location: Fargo ND
Default

I concur...

Lynx parts are drying up day by day...

I've purchased several MicroHeli frames tho...450X and 300X
Indokast likes this.
__________________
nCPX(3)*mCPX(30)*130X(10)*130X-L(6)*180CFX(3)*300X/CFX(3)
450X(7)*470LP*GauiX3*nanoQX*180QX*DX9*HF180060*AMA 988253
JonJet is online now        Reply With Quote Quick reply to this message
Old 04-13-2018, 03:22 PM   #31 (permalink)
Registered Users
 
Posts: 2,928
 

Join Date: Mar 2014
Default

yeah microheli and rkh make good stuff.
__________________
Brandon Chew aka ~INDO~
Team Lynx / Oxy Heli
Oxy 2, 3, 4, 4Max, 5
plus many others 420 and under
Indokast is offline        Reply With Quote Quick reply to this message
Old 07-30-2018, 12:02 AM   #32 (permalink)
Registered Users
 
Posts: 8,989
Thread Starter Thread Starter
 

Join Date: Feb 2013
Location: Fargo ND
Default

After a couple months...I decided to rebuild the 300CFX from the ground up...

Swapped the KST215's that didn't fit very well in the stock frame for H3050 cyclics and KST215 for the tail...

A few snafu's in the setup caused a couple tipovers...but new main blades are on the way...

Even with the beat up mains it flies great

When the new blades arrive I'll post the new setup
Indokast likes this.
__________________
nCPX(3)*mCPX(30)*130X(10)*130X-L(6)*180CFX(3)*300X/CFX(3)
450X(7)*470LP*GauiX3*nanoQX*180QX*DX9*HF180060*AMA 988253
JonJet is online now        Reply With Quote Quick reply to this message
Reply




Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Location
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.

Log-in


Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




Copyright © Website Acquisitions Inc. All rights reserved.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.

SEO by vBSEO 3.6.1