Fun, Learning, Friendship and Mutual Respect START  HERE


Unregistered
Go Back   HeliFreak > R/C Helicopter Support > Blade Helicopters (eFlite) > 270CFX


270CFX Blade 270CFX Helicopters Information and Help


Reply
 
LinkBack Thread Tools Display Modes
Old 04-23-2018, 08:56 AM   #1 (permalink)
Registered Users
 

Join Date: Apr 2018
Default BeastX Upgrade

Hello there!

I have a problem with my 270cfx. I'm new to helis and bought a 270cfx last winter (after flying the 200s for several months). After the first few flights I really wished for a self leveling mode so today I purchased the firmware upgrade and upgraded the AR7210BX to the HELI 5.1.2 PRO firmware. And then I realized that I've no idea at all how to configure the whole thing... I fear that I lost all the standard settings and I'm lost with a barely functional heli... My mistake: There was no instructions for the process, so I thought I just give it a try. Did someone already go through the whole process and knows which things I have to consider while setting up the heli? Are the original settings lost and do I have to set up the heli from scratch? Any help is highly appreciated! Thanks!

Peter
pmjr is offline        Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 05-02-2018, 03:47 AM   #2 (permalink)
Registered Users
 

Join Date: Mar 2015
Location: Germany / Nuremberg
Default

Hallo Peter,

Du hast doch somit die neueste StudioX Applikation für den PC.

Kannst Du Dich nicht in das BeastX Manual oder Wiki AttitudeControl - BEASTX Wiki einlesen?

Hat wirklich HH für die neueste Firmware ein 270CFX Setting-Update (Default) herausgebracht was Du einspielen könntest, inbes. AttitudeControl?


Ich würde einfach jedes vorhandene Menü strukturiert einzeln komplett durchgehen (Servo Subtrimm, 0-degree Pitch, Max. Pitch Ausschläge, etc.), wie bei einem neuem Heli-Kit (also von 0 starten).

Meiner Meinung nach müßte ein Firmware Upgrade die Einstellungen zurückstellen, gerade bei ganz neuen FBL Versionen.

Macht m.E. kaum Sinn irgendwelche Defaults zu laden; die Scales könnten ja theoretisch leicht unterschiedlich von den Firmwares sein, wie man dies bsw. zu anderen FBL immer wieder liest.

Leider hat Blade kein gutes Manual mehr für seine Helis, wie es noch zu 450X V1 und AR7200BX war, wo wenigstens noch BeastX Defaults abgedruckt waren (z.B DS76T+DS76 Servo Frequency <333Hz).

Die Servo Frequenzen würde ich beim H3060 auf 270Hz und bei den drei H3050 Cyclics SETUP MENU B - Swashplate frequency - BEASTX Wiki auf 120-200Hz stellen (auf den 333Hz eher nicht).

Ich schreibe Dir das "gutgemeint" unter dem Disclaimer, dass ich selbst bisher nur mit Tarot ZYX einen Walkera V120 eingestellt habe, nicht jedoch BeastX :-)

PS: Sorry guys, that I write this in German, but Peter ist from Switzerland and I could type (think) it much faster than being forced in translating/writing everything in English.

Viel Erfolg!

Gruß

Thomas
__________________
Walkera Devo 10/DeviationTX (12CH DSMx & telemetry)...Ex-DX8...Blade 4503D...Walkera V120D02s...Blade 200QX BL Quad...StrykerQ (LEDs, M2 tuning)...Ex-NanoCPX...Ex-120SR...Ex-MPX EGP...PPZ P51-D Mustang...PZ Wildcat (searching fuselage-firewall)
Thomas.Heiss is offline        Reply With Quote Quick reply to this message
Old 05-05-2018, 03:36 AM   #3 (permalink)
Registered Users
Thread Starter Thread Starter
 

Join Date: Apr 2018
Default

Hey Thomas!

Vielen Dank für deine Antwort. Ich hab deinen Rat befolgt, mich ins BeastX eingelesen (bin halt blutiger Anfänger) und den Heli von null auf eingestellt. Und nun funktioniert alles bestens, sogar die AttitudeControl! Bin froh, dass es nun geklappt hat. Vielen Dank nochmals!

Liebe Grüsse,

Peter

(Problem solved! Thread can be closed now )
pmjr is offline        Reply With Quote Quick reply to this message
Reply




Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Location
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.

Log-in


Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




Copyright © Website Acquisitions Inc. All rights reserved.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.

SEO by vBSEO 3.6.1