Whats your Goblin 570 setup

[Blade45240]

Red And Black Carbon Edition
Vcontrol and Neo, Pro Rescue
Xnova 4025 1120kv (23t pinion) Headspeeds/Bank1-2050, Bank2-2180, Bank3-2300
Hobbywing 100A v3 with Mikado UI Current Sensor
Scorpion Tribunus 120a SBec! On its way to pair with the Vcontrol and test all the new goodies out.
570 Thunderbolt, 570 Zeal Main Blades
Rail 96 Tail Blades
RJX HV Cyclic and Tail
Evo Power 6s 5000mah
Pulse 6s 5500mah

[simontiny]

Hello,
My setup
- pyro 650 - 62 / 21T pinion
- Hobbywing 130A hv v4 with telemetry by msh Brain 2 + MZ24 Hott
- Brain 2
- 3x rjx Fs 0521 HV on cyclic
- MKS BLS 980 HV (tail)
- SAB 3D 570 blades
- Lynx option Upper tail case
- Lipo : 2x Zippy compact 3300mah 6s 60c

Best regards
SImon

[in.kuzmenko]

My setup
- HKIII-4025-550 12S / 23 T pinion (2500-2600 rpm)
- Castle Phoenix Edge 120A hv
- Vbar v5.3 pro
- 3x TORQ 9180 HV on cyclic
- TORQ 9188 (tail)
- Zeal 570 blades
- WR BEC (20A)
- Lipo : 2x 3300mah 6s 65c

[DarkVamp]

I will soon buy a 570 KSE.
At home i have a Scorpion HK-4025-740 kv engine.
This engine is for max 10s , could it work ? i was thinking with 3300mAh 65-130 c and, a 130A ESC and 19 pinion ?
I do some very beginners soft 3D, and i would like to get into tic toc and rainbows.
Will it have enough power ?
or should i go for other engine and 12s right away ?

Thanks

[JWeber]

Originally Posted by DarkVamp

I will soon buy a 570 KSE.
At home i have a Scorpion HK-4025-740 kv engine.
This engine is for max 10s , could it work ? i was thinking with 3300mAh 65-130 c and, a 130A ESC and 19 pinion ?
I do some very beginners soft 3D, and i would like to get into tic toc and rainbows.
Will it have enough power ?
or should i go for other engine and 12s right away ?

Thanks

As for 12S vs 6S. As a beginner doing tic tocs, you'll probably draw more power than an expert doing tic tocs because you're just learning collective management. I'm using the Xnova 4025-550 and 12S 3000mAh packs. If the motor is rated for 10S max, then you should probably respect that rating and get an appropriate motor or see if you can do a 10S stick pack if you haven't bought packs yet. Equivalent weight would be a 10S 3600. With a quick google search, I found a couple of 5S3600 options out there.

[DarkVamp]

Thanks for the answer !

Because my post is a bit out of topic, i have created a serperate thread.

And yes, i forgot to mention, i would like to run it on 10s

[wkderf]

Just started a 570 build. Hope to be able to maiden it by the weekend.

Flight Style: Scale / Sport
FBL System: iKon 2 (also have a Naza H coming in)
Transmitter: Spektrum DX9
Reciever: SPM4649T & 2 DSMX Satellites
Motor: Xnova 4025-1120Kv
Pinion: 22t
Target Headspeed(s): 2200 / 2550
ESC: Hobbywing Platinum 120A V4
Governor: iKon
BEC: Hobbywing
Cyclic Servos: BK 7001
Tail Servo: BK 7005
Main Blades: SAB 570mm
Tail Blades: SAB 95mm
LiPos: Gens Ace 6s 5000mah

[Slow Thumbs]

Here's mine:

Goblin 570 running 6s

FBL: VBar NEO
Motor: Xnova 4025 - 1120kv
ESC: HobbyWing 130A V4
BEC: HobbyWing built in
Cyclic: BK DS-7002
Tail: BK DS-7006
Pinion: Stock 21T
HS: 2000 / 2200 / 2400
Gov: VBar NEO
Main Blade: Stock
Tail Blade: Stock
Batteries: Revolectrix 6s 4500
Pitch: +/-14 deg
Training flight time: ~ 4:00
Show off flight time: ~ 2:30

Goblin 570 KSE running 12s

FBL: VBar NEO
Motor: Scorpion HKIII 4025 - 650kv
ESC: Scorpion Tribunus 130A
BEC: Scorpion built in
Cyclic: BK DS-7002
Tail: BK DS-7006
Pinion: 24T
HS: 2200 / 2400 / 2600
Gov: VBar NEO
Main Blade: Stock
Tail Blade: Stock
Batteries: Revolectrix 6s 3300 x2
Pitch: +/-12 deg

[3Daemon]

Slow Thumbs, could you please share the ready to fly weight for both?

[macpass]

Just ordered a 570 KSE to run 7s

FBL: VBar NEO
Servos: BK 7002 on cyclic and 7006 on tail
ESC: CC Phoenix Edge 130
BEC: 2 x 2s lipo straight in to FBL
Motor: TBC but thinking the Xnova 4025-1120 and 18T pinion should be a solid choice for 7s on the tri blade head
Blades: Stock
Packs: Revo 4400mah

[simontiny]

My 570 6s setup

Flight Style: 3d / hard 3d
FBL System: Brain 2
Transmitter: Graupner MZ 24
Reciever: GR16
Motor: Kontronik Pyro 650 1030kv later: idem competition pyro
Pinion: 23t
Target Headspeed(s): 2550 tr/mn
ESC: Hobbywing Platinum 120A V4 / I wait for a graupner T160 Hv
Telemetry with Brain 2
Governor: Hobbywing
BEC: internal
Cyclic Servos: Outrage Torq Bl 9180 HV
Tail Servo: Mks BLS 669 HV
Main Blades: SAB Thunderbolt 570mm
Tail Blades: SAB 95mm
LiPos: Gens Ace 6s 5000mah 60c / KD Lipo 6s 5200mah 60c / DInogy graphene 6s 5000mah 70c
Flying weight : 2520gr without Lipo / 3300gr with lipo
flight time : 3 mn 30 - 4mn

Wonderfull Heli : powerfull, agile, smooth

[Martinshelis]

Goblin 570: Canomod XLC Carbon Ferrari combo
Motor: Scorpion HKIII-4025-650KV
Motor Pulley: 21T
ESC: Scorpion Tribunus 130a
Bec: Internal @8.0v
Governor: Vgov
Cyclic servos: Xpert Minis MM-3301-HV
Tail servo: Xpert Mini MM-3302T-HV
FBL/RX: Vbar Neo
Lipos: Revolectrix Blend 435 12s 3200mah w/ec5
Main blades: Sab 570TB
Tail blades: Sab TB
Target Headspeeds: 2000rpm - 2200 - 2400
14 Degrees
Radio: Vcontrol

Upgrades:
19T Tail Pulley
Big Belt/Pulley
Lynx Dampers
Lynx Tail brace
Lynx tail control horn
Sab Delrin main gear
Heli-Option Tail Control Rod
Sab Servo Horns
Modified Sab 500 sport landing gear
Sab 500 mini servo supports
Lynx Mini tail servo support

AUW: 7lbs 4oz / 3.288kg

[miron]

Goblin 570 SPORT

• FBL System: SK540
• Motor: KDE 600XF-530kv
• Pinion: 24t
• Target Headspeed: 2400-2500
• ESC: HW100A HV
• BEC: external about 60 g.
• Cyclic Servos: Align bl815h
• Tail Servo: SI-2202-HV
• Main Blades: Stock
• Tail Blades: Stock
• LiPos: Gens ace and KDLipo 2 x 6S 3300 45C
• Rcv: Futaba R3008SB

RTF weight 4kg
Weight without lipos 2.75kg

Quite heavy...Flight time about 4 minutes

[Helimaster1]

Helicopter: SAB Goblin 570 Sports.
Motor: Scorpion HKIII 4025-1100 KV Motor.
ESC: Hobbywing 130 V4 Platinum ESC.
Servos: Bk Servos 7002/7006
Battery: KD Lipo 6S 5000 Mah 70 C Gold Edition
Transmitter: Mikado V-Control
FBL: Mikado Vbar NEO
Lubrication: DryFluid Extreme Lube.
Connectors: Rcproplus Suprax S7 Connectors

2450 RPM / Pitch 13.

[mil-lion]

Model: SAB Goblin 570 Sport
Motor: XNOVA 4025-560KV
ESC: Scorpion Tribunus 12-130A
FBL: Mikado VBar Neo with Vlink
Transmitter: Mikado VBar Control
Extra: Mikado Battery ID Sensor
Cyclic Servo: MKS HBL-960HV
Tail Servo: MKS HBL-990HV
Main Blade: SAB 570BT (stock)
Tail Blade: SAB 95BT (stock)
Pinion: 23T
Battery: 2xHRB 6S 3300mAh 35C

Upgrade:
H0321-S SAB Quick Release Canopy Pin
H0398-S Aluminum Cooling Motor Mount
LYX1510 Lynx Heli Goblin 380/500/570 Precision Tail Bell Crank Lever (Black)

Weight: 2795g, 3855g with battery

[JayDee]

Mine just maidened last Sunday.

570 Sport Orange

Flight Style: Scale / Sport
FBL System: Brain 2 HD (c/w inbuilt bluetooth)
Transmitter: Spektrum DX9
Reciever: SPM4649T & 2 DSMX Satellites
Motor: Scorpion 4025 550kv
Pinion: 21t
ESC: Castle Phoenix Edge 80HV
Governor: Brain
Receiver Pack: 1300mah 2S Gensace (future will be 2200mah)
Cyclic Servos: BK 7002HV
Tail Servo: BK 700HV
Main Blades: SAB 570mm
Tail Blades: SAB 95mm
LiPos: Gens Ace 6S 45C 3300mah x 2 (12S setup)

The orange is an absolute stunner in the air. Images on line don't do it justice.

[Chigoe]

Goblin 570 Freedom Edition #19

Flight Style: Mild 3D/Big air
FBL System: Brain2
Transmitter: Spektrum DX18
Reciever: SPM4649T & 2 DSMX v2 Satellites
Motor: KDE600XF-1100-G3
Pinion: 22t
Target Headspeed(s): 2250
ESC: Kontronik Kolibri 140 @ 84%
Governor: Kontonik
BEC: Kontronik 10amp with Spektrum cap SPM1600 @ 8.4v
Cyclic Servos: Xpert R2 with 17mm Secraft arms
Tail Servo: Xpert R2T with 17mm Secraft arm
Main Blades: VTX 557
Tail Blades: Rail 95mm
LiPos: Gens Ace 6s 5500mah 60C x three sets and trays

Upgrade HS tail pulley
Canopy quick release
Alum servo mounts
BK tail rod thread mod

[Ravmano7]

My Goblin 570 Sport Orange

Xnova 4025-1120kv
Hobbywing 120a V4
BK DS7002hv cyclic
BK DS7006hv tail
Ikon2 w/ BT aluminum version
Spektrum 4649T with 2 Satalites
Gene Ace 5000mah 60c
VTX 557 mains
SAB 95mm tail
Headspeeds 1800/2050/2300
Flight style: sport/just learning

Awesome Heli!

[daveisdiving]

so i finaly got the sab goblin 570 switching from nitro to electric so any help would be great what do you guys recommend for the fly bar system ive ben looking at the
the ikon besides whats listed what else would i need i have a spectrum radio and a
futaba 14sgh radio have not desided witch radio to go with yet

sab goblin 570 Drake edition

motor going with the Scorpion HKIV-4025-1100KV

lipo PULSE 5500mAh 6S 22.2V 65C - LiPo Battery

Bert Kammerer FULL SIZE CYCLIC SERVO DS-7002HV

Bert Kammerer FULL SIZE TAIL SERVO DS-7006HV

[rex09]

Originally Posted by Guiwee

Well don't know if I can get this started but I think we need a setup thread!!
Please designate 6s or 12s!
Please make a sticky?..

Can we add what model, Classic, sport, KSE