Fun, Learning, Friendship and Mutual Respect START  HERE

Go Back   HeliFreak > R/C Electronics Support > Spartan RC > Spartan Vortex

Spartan Vortex Spartan RC - Vortex VX1 Factory Support Forum

LinkBack Thread Tools Display Modes
Old 04-24-2019, 09:14 PM   #1 (permalink)
Registered Users

Join Date: Sep 2011
Default align DS655 ISSUE

I have a serious problem.
I have the quark gyro
i have the DS655 servo
the gyro is set to option 1, servo type for servo type
as soon as i power on, gyro,the servo straight away starts to oscillate clockwise and anti clockwise very quickly.It is impossible to get into SET mode on the gyro, the gyro is totally unresponsive when the servo is doing this.
what is going on?
lizza is offline        Reply With Quote Quick reply to this message
Sponsored Links
Old 04-26-2019, 02:04 PM   #2 (permalink)
Registered Users
Posts: 3,728

Join Date: Dec 2010
Location: MI

Did you do this first?


The selected servo type must match the servo you are using. Incorrect setting may damage the servo and possibly resulting in a loss of tail control during flight.

You must change the servo type before connecting the servo to the gyro. Disconnect the servo if already connected.

Do not attempt to use analogue servos. Severe damage may be caused to your servo or loss of tail control during flight.

Do not attempt to fly your model while the servo type selection mode is active, tail stabilisation will not function.

1) flash (default)
1520uSec at 333Hz Futaba S9253 / S9254 / S9257 / S9650 / S3153 / S3154, BLS254, JR 8900G / 3400G / 3500G, Align DS410 / DS420 / DS510 / DS520 / DS610 / DS620 / DS650, Sanwa ERG-WRX, Airtronics 94758 / 94761, Hitec 5925MG / 6965HB / 5083MG, Robbe FS61BB

2) 760uSec at 560Hz Futaba S9251 / S9256 / BLS251, MKS DS8910 / BLS980

3) 1520uSec at 250Hz JR 2700G / 8700G / 810G, Sky HDS-577 / HDS-877 4 960uSec at 333Hz LogicTech 6100G / 3100G, Hitec 5083MG
Compass Chronos & 6HV,6HVu,Mcpx BL,CFX180
DS-16!!,Phoenix 5

Team Flybar & "Less" now
LubeMan1 is offline        Reply With Quote Quick reply to this message
Old 04-26-2019, 10:43 PM   #3 (permalink)
Registered Users
Posts: 470

Join Date: May 2011
Location: Northern VA just outside DC (inside the 15 mile SFRA)

What radio and receiver are you using? If Spektrum, are you using 22ms or 11ms frame rate? If 11ms, try 22ms, which has wider compatibility.
timay is offline        Reply With Quote Quick reply to this message

Quick Reply

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.
Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.


Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Copyright © Website Acquisitions Inc. All rights reserved.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.

SEO by vBSEO 3.6.1