Register Now

Bugle call · 08-09-2019, 05:46 PM

I bought a 130X ages ago and never really took it out the box.
Just decided to try my luck with a heli again.
plugged the supplied power supply and charger in then the lipo . All its done is flash 1 light.
reading the back of charger its says red and green lights.
I am terribly colour blind and the lights are the same to me.
can anyone tell me if , left or right or both lights as a system will work if so can anyone tell me that,this is no joke, the only leds I can tell are bright white and blue.thanks

inganeer · 08-10-2019, 08:04 AM

My charger is at work. But if I remember right on it after you push the button to start the process. The left (red) LED will blink. The right (green) LED would blink indicating balancing. When battery was done the left LED would be constant on.

Hope this helps you.
I fly mine almost daily. I take one or two to work with me.

Sent from my LGL63BL using Tapatalk

Bugle call · 08-10-2019, 01:04 PM

Thanks for the clear info. I tthink mine as a prob somewhere, left light never goes solis,blinks full time. I read somewhere I am sure that the supplied power supply is not right for the charger,not enoghh amps but cant find the post?

PassinThru · 12-26-2019, 08:25 PM

Quote:

Originally Posted by inganeer

My charger is at work. But if I remember right on it after you push the button to start the process. The left (red) LED will blink. The right (green) LED would blink indicating balancing. When battery was done the left LED would be constant on.

Hope this helps you.
I fly mine almost daily. I take one or two to work with me.

Sent from my LGL63BL using Tapatalk

After connecting a discharged battery to the charger, I push the start button until it's only the left (red) LED that flashes. After a while the right (green) LED will start flashing very intermittently. The green LED flashes more frequently as the battery charges. When the battery is fully charged, the left (red) LED is off and the right (green) LED stays on.

Mrowka · 12-28-2019, 11:33 AM

FWIW I have had at least three of the factory supplied chargers go on the fritz on me.

Maturecruiser · 12-30-2019, 09:47 PM

The post from Passin Thru shows the correct sequence of lights. The chargers do seem to be fairly slow at charging and not great at balancing. I just use 12v 1amp as a power supply. The actual charger has an output of 300mAh hence it is fairly slow.

08-09-2019, 05:46 PM	#1 (permalink)
Bugle call Registered Users Join Date: Aug 2019 Location: England	Help with supplied 130x charger I bought a 130X ages ago and never really took it out the box. Just decided to try my luck with a heli again. plugged the supplied power supply and charger in then the lipo . All its done is flash 1 light. reading the back of charger its says red and green lights. I am terribly colour blind and the lights are the same to me. can anyone tell me if , left or right or both lights as a system will work if so can anyone tell me that,this is no joke, the only leds I can tell are bright white and blue.thanks

12-28-2019, 11:33 AM	#5 (permalink)
Mrowka Registered Users Join Date: Jul 2018	FWIW I have had at least three of the factory supplied chargers go on the fritz on me. __________________ 130X parts wanted! The Precious! You has the Precious!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-10-2019, 08:04 AM	#2 (permalink)
inganeer Registered Users Join Date: Apr 2016	My charger is at work. But if I remember right on it after you push the button to start the process. The left (red) LED will blink. The right (green) LED would blink indicating balancing. When battery was done the left LED would be constant on. Hope this helps you. I fly mine almost daily. I take one or two to work with me. Sent from my LGL63BL using Tapatalk

08-10-2019, 01:04 PM	#3 (permalink)
Bugle call Registered Users Thread Starter Join Date: Aug 2019 Location: England	Thanks for the clear info. I tthink mine as a prob somewhere, left light never goes solis,blinks full time. I read somewhere I am sure that the supplied power supply is not right for the charger,not enoghh amps but cant find the post?

12-30-2019, 09:47 PM	#6 (permalink)
Maturecruiser Registered Users Join Date: Oct 2015	The post from Passin Thru shows the correct sequence of lights. The chargers do seem to be fairly slow at charging and not great at balancing. I just use 12v 1amp as a power supply. The actual charger has an output of 300mAh hence it is fairly slow.

Register Now

Log-in