Fun, Learning, Friendship and Mutual Respect START  HERE


Unregistered
Go Back   HeliFreak > R/C Helicopter Support > Blade Helicopters (eFlite) > Blade Nano S2



Reply
 
LinkBack Thread Tools Display Modes
Old 10-21-2019, 11:45 PM   #1 (permalink)
Registered Users
 

Join Date: Oct 2019
Location: Australia
Angry Red & Blue LED Diagnostics

Hi all

Approx 50 flights on new Blade Nano S2.
Minor crashes only.

Now when I spool up sometimes the Heli spins on the ground (as if the tail motor is not working) then the main motor cuts out and the red LED on the 3 in 1 board lights up.

If the heli is on the ground it resets, levels the swash, red led goes out (Blue light is always on) and ready again.
However move the throttle to spool up and either the heli spins again or the main blades do one rotation and the red LED immediately turns on and seems to shut the main motor down.

Does the red LED "ON" indicate "HOLD"?

Any ideas?

Is this a main board issue? (I've replaced the tail boom and motor)
What are the diagnostic codes for the red & blue LEDs?

Cheers

Ozie Joe
OzieJoe is offline        Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 10-22-2019, 01:42 AM   #2 (permalink)
Registered Users
 

Join Date: Jul 2019
Location: Hong Kong
Default

I think the board is faulty and need replacement...or buy a new one if you donít want to spend half the heli price for a board. Not sure if HH will replace that free of charge.


Sent from my iPhone using Tapatalk
HumanYeung is online now        Reply With Quote Quick reply to this message
Old 11-11-2019, 06:37 AM   #3 (permalink)
Registered Users
 
Posts: 1,403
 

Join Date: Feb 2019
Location: USA::Ohio
Default

on the MSR S I had a bad battery that caused behavior like this... Not sure what was happening but if I used a different battery it worked fine.
__________________
Spektrum DX8G2, AccuRC Simulator
Blade Scout CX, MSR S, Nano S2, 230s V2, 360CFX, NanoQX
Oxy 4 MAX
SAB Goblin 500 Sport
fiddle is offline        Reply With Quote Quick reply to this message
Old 11-19-2019, 04:39 AM   #4 (permalink)
Registered Users
 

Join Date: Feb 2014
Location: Luxembourg
Default

Maybe you had a wrong rebind. Read the manual carefully, if you pull rudder stick to the left or right when binding.
This depends on your radio (computer (full right) or non-computer (full left)).


I had (after false binding) the red and blue light on together (purple).
After correct binding you should have only blue light in normal mode.
lahannsven is online now        Reply With Quote Quick reply to this message
Reply




Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Location
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.

Log-in


Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




Copyright © Website Acquisitions Inc. All rights reserved.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.

SEO by vBSEO 3.6.1