Eyeboot power supplies

[gmann]

You guys know anything about these?

https://www.amazon.com/Eyeboot-Unive...tronics&sr=1-1

The spec sheet on the 27V psu says it's adjustable up to 30V. This unit may be a little low on the amps, but looks pretty good for an intermediate charger for the price.

[gmann]

Just curious if any of youse guys had an opinion... I don't "need" one of these right now, but looking at this as a less expensive 27-30V PS for a smaller charger, like 600W, in my future Just because it would be a leetle easier to have a "cheap" 24+V PS already without having to get 2 DPS1200's and mod one, etc.

[gmann]

Bump...

[gmann]

I finally got a very similar P/S:

https://www.amazon.com/HobbyUnlimite...ronics&sr=1-33

I didn't want to do the "float thing" again on yet another DPS1200 pair to make 24V, which is amperage overkill anyway for a 600W 25A max charger... I've got enough of those PS's already.

Here's how to hook up the power:

Wiring up a Power Supply (PSU) (5 min 12 sec)

Easy easy.

I cut off 2 female banana plugs I had to attach to the PS.

This is working very well for me, delivering 600+W to the T6 charger - its max output is 25A, and the P/S delivers this just fine, no overheat. The voltage adjust gets it up to over 27V - this charger will take 32.

May work for ya'll in a 500-600w 24V+ input smaller charger.