Register Now

Texer · 01-02-2021, 06:05 AM

Hi,

Can someone explain how to assign throttle hold to a 30% throttle curve on Vcontrol?

What I want is to set up the throttle hold recovery for the hobbywing esc according to this video at 8:20 minutes.

Hobbywing 130HV V4 Opto Throttle Calibration, Gov Store & Throttle Hold setup (12 min 40 sec)

Thanks

tonys-heli · 01-02-2021, 07:23 AM

deafult is already set to 20% for vcontrol i believe. when you move from motor run, then to motor idle, then back to run, it spools up quick.. without soft start.

Vinger · 01-02-2021, 08:39 PM

Which governor are in use? Do you have PRO firmware on the Neo and are you using a VBC or a VBCt?

Texer · 01-03-2021, 07:08 AM

I'd like to use the hobbywing "governor store". I have pro in Neo and I'm using a non-touch vcontrol.
thanks.

tonys-heli · 01-03-2021, 08:27 AM

it already works like that in the vid.. just move the motor switch from run, to idle, then back to run. it will spool up quick.
its already setup in the vcontrol, not the esc.
all mine do it and i didnt setup anything.

https://www.vstabi.info/en/node/1679

you can raise the autorotation value, but i never had to.
you cant compare spektrum to vcontrol, just learn how vcontrol works and it will start to click.

jhamel · 01-04-2021, 08:47 AM

In the VBC Touch, the Autorotation throttle is a bit hidden. You have to scroll down the Governor page to view and/or adjust the AR throttle.

01-02-2021, 07:23 AM	#2 (permalink)
tonys-heli Registered Users Join Date: Dec 2014 Location: always windy on the east coast	deafult is already set to 20% for vcontrol i believe. when you move from motor run, then to motor idle, then back to run, it spools up quick.. without soft start. __________________ a bunch of helis... now all vcontrol and neo..finally :lol

01-02-2021, 08:39 PM	#3 (permalink)
Vinger Registered Users My HF Map location Join Date: Sep 2007	Which governor are in use? Do you have PRO firmware on the Neo and are you using a VBC or a VBCt? __________________ Henseleit TDR, TDR2, TDF, TDS, TDSF Kontronik, Scorpion ESC, iChargers, VBar, VControl Old hand at Planks Peter

01-03-2021, 08:27 AM	#5 (permalink)
tonys-heli Registered Users Join Date: Dec 2014 Location: always windy on the east coast	it already works like that in the vid.. just move the motor switch from run, to idle, then back to run. it will spool up quick. its already setup in the vcontrol, not the esc. all mine do it and i didnt setup anything. https://www.vstabi.info/en/node/1679 you can raise the autorotation value, but i never had to. you cant compare spektrum to vcontrol, just learn how vcontrol works and it will start to click. Thickfog and joeflash211 like this. __________________ a bunch of helis... now all vcontrol and neo..finally :lol

01-04-2021, 08:47 AM	#6 (permalink)
jhamel Registered Users Join Date: Mar 2011 Location: West Seattle, WA, USA	In the VBC Touch, the Autorotation throttle is a bit hidden. You have to scroll down the Governor page to view and/or adjust the AR throttle. __________________ 14S Specter 700 V2 NME/Tron 7/Kraken; 8S Tron Dnamic; 7S Kraken 580; 6S Buddy 380 KSE VBCE/Neo/EVO, Jeti/Spirit, YGE "T" ESCs; LiFePO4 field charging batteries Sims on Mac: Heli-X, neXt, AccuRC, Phoenix, AeroFly RC7 Ultimate Amain Team Pilot

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-03-2021, 07:08 AM	#4 (permalink)
Texer Registered Users Thread Starter Join Date: Dec 2019 Location: high castle	I'd like to use the hobbywing "governor store". I have pro in Neo and I'm using a non-touch vcontrol. thanks.

Register Now

Log-in