Will phoenix dongle work with AccuRc ?

[brokenwing40]

I have been looking around and can't seem to find out it it will work or not. I have Been flying the phoenix the past few days and wow it feels strange. Not real at all. I use to like it, but it has been some time since I have used it. I am new to AccuRc. From what I can tell all I have to do is down load it from their wed site. Plug and play would be nice if all I had to do was use the same phoenix cable. If not I will have to order a Spektrum wireless.

[beeflyer2]

AccuRC doesn't require a dongle. Just a USB cable!

[brokenwing40]

So good I'm all set. My Phoenix cable will work?

[curmudgeon]

I don't believe the original Phoenix USB dongle will work with any simulator except for Phoenix. The cheap USB dongles (Amazon, eBay, Hobby King, etc.) should work with all simulators (including Phoenix), but watch out as some USB dongles only support 4 channels while others support 8. However, most modern simulators (neXt, Heli-X, AccuRC 2.x, RealFlight 8+, RC7+, etc) just need a standard USB cable compatible with your radio; no dongle needed.

[fiddle]

He said Spektrum. The absolute best solution for Spektrum is this: https://www.amainhobbies.com/spektru...s2000/p1141873 Plug it in to your computer. Bind your radio to it per instructions. Open joy.cpl on your computer and you can do properties to make sure everything is functioning correctly. You can also use this screen in conjunction with radio programming to figure what switches you want sent (usually, your radio will have more switches and things than it has channels). AccuRC will see the thing as a joystick as intended and your off!

[brokenwing40]

Thank you I will check in to picking up a
Spektrum RC Wireless Simulator USB Dongle

[Ade_Law]

use this guide if you are using the ws2000 dongle, requires a small amount of config in the radio, couple of drop downs set in AccuRC and calibration then you are good to go.

https://accurcsimulator.com/spektrum...-preset-added/

Ade