Fun, Learning, Friendship and Mutual Respect START  HERE


Unregistered
Go Back   HeliFreak > R/C Electronics Support > Spektrum FBL System > Spektrum FC6250HX



Like Tree1Likes
  • 1 Post By brianbremer
Reply
 
LinkBack Thread Tools Display Modes
Old 08-10-2020, 04:44 PM   #1 (permalink)
Registered Users
 

Join Date: Mar 2018
Default pitch/roll travel adjustment

Sorry for the stupid question but even after looking at the YT videos I am not quite sure about the procedure.

When setting up the pitch/roll 12.5 degrees travel you need to put the pitch gauge on one blade and make it a) parallel to the tail boom for roll and b) // for pitch

What I am not sure is about the pitch gauge default setting.

It is mentioned you should zero down the pitch gauge. ok but what does it mean? Do you need to adjust throttle/pitch stick when a)blade is parallel to the tail boom and move it until you read 0 and then do the same with b) ?

Or does it just mean blades must be at 0 degree angle for a) and b)

obviously it is not the same at all as if you try to zero the pitch gauge when the blade is parallel to the boom it will certainly not make the blades at 0 degree angle.

I am not sure I am clear so to say it differently: when mentioning 0 for the pitch gauge reading is it 0 degree pitch or do you have to 0 it when blades are parallel and then // ?
erich74 is online now        Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 08-11-2020, 11:37 AM   #2 (permalink)
Registered Users
 

Join Date: Sep 2010
Default

Center collective stick should be near 0 degrees after sub trimming and linkage adjustment. Slightly off to start out won't cause any issue here since you are zeroing the pitch gauge to the current position and then measuring the relative throw from that reference point.

Align the blades with the boom, center collective stick, zero pitch gauge out, apply full right cyclic and adjust roll afr until you see 12.5 on the pitch gauge.

Rotate the blades so they are perpendicular to the boom, zero, full aft cyclic and adjust pitch afr to see 12.5.
Bluebell likes this.
__________________
Horizon Hobby, LLC
My Projects: 150 S, 200 SRX, 200 S, 230 S v1/v2, 270 CFX, Fu270, Fu480: AR636/AR6335 Heli, FC6250HX, AR6250MHX
brianbremer is offline        Reply With Quote Quick reply to this message
Old 08-12-2020, 01:09 PM   #3 (permalink)
Registered Users
Thread Starter Thread Starter
 

Join Date: Mar 2018
Default

Thanks Brian, I got it now!
erich74 is online now        Reply With Quote Quick reply to this message
Old 01-24-2021, 03:18 PM   #4 (permalink)
Registered Users
 
Posts: 924
 

Join Date: Mar 2014
Default

Mistake post
__________________
Blade: Nano QX, SR, 230s, 400 3D
Walkera: V120D02s
Align: 450L Dominator, 450 Pro DFC,
500 Pro DFC

Last edited by nighttrain06; 01-24-2021 at 06:19 PM.. Reason: Double post
nighttrain06 is offline        Reply With Quote Quick reply to this message
Reply




Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Location
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.

Log-in


Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




Copyright © Website Acquisitions Inc. All rights reserved.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.

SEO by vBSEO 3.6.1