Switchable user screen

[the_jane_doe]

Hello everyone

I have created 2 user screens, one for pre-flight and one for flight.

I would like to have the pre-flight one as default and then when I pull the engine switch, it goes to the flight one.
And this for all models on my Neo.

Is there a way to make this work?

Thank you very much

[Vinger]

VBC or VBCt?

[the_jane_doe]

Originally Posted by Vinger

VBC or VBCt?

VBC

[Vinger]

My naming the files for the screen correctly you can have different screens per bank or make the screen switchable by selecting the switch in the userscreen setup.

https://www.vstabi.info/en/udms

[the_jane_doe]

Originally Posted by Vinger

My naming the files for the screen correctly you can have different screens per bank or make the screen switchable by selecting the switch in the userscreen setup.

https://www.vstabi.info/en/udms

Thanks for the answer

I have already seen that page and tried to follow the instructions, but when I try to do the 3rd option(Depending on the model and switchable) and I select:

Switch: Option 3(for example),

I see the Name field being: [model name]_flight.usr(which it doesn't exist) instead of flight.usr(which is the one I created).

And of course the transmitter says that no [model name]_flight.usr was found

[Vinger]

The file does need the model name in it. Make sure you spelled it the same as the actual model name.