Fun, Learning, Friendship and Mutual Respect START  HERE


Unregistered
Go Back   HeliFreak > R/C Electronics Support > Kontronik Drives


Kontronik Drives Jazz and Jive ESC's and other Kontronik equipment support


Reply
 
LinkBack Thread Tools Display Modes
Old 03-13-2021, 05:15 PM   #1 (permalink)
Registered Users
 

Join Date: May 2020
Location: Southern California
Default Kosmik 160 HV No LED's

Trying to set up the basics on a 160HV and have problems. It is fresh out of box. When the battery (44.4V) is attached to the ESC, I get BEC voltage but no LED's showing cell count and not even lighting. Is this ESC DOA or is there some kind of cold start procedure. Any one else experience the same or similar problem.

Thanks in advance.
ir3an is offline        Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 03-13-2021, 09:59 PM   #2 (permalink)
Registered Users
 
Posts: 11,820
 
My HF Map location
Join Date: Sep 2007
Default

Check master and slave cable are correctly plugged in, orientation as well as master to your throttle channel on RX or FBL.

Have to do the programming next, all done via stick programming.

Manual here https://www.kontronik.com/fileadmin/...OSMIK_HV-I.pdf
__________________
Henseleit TDR, TDR2, TDF, TDS, TDSF
Kontronik, Scorpion ESC, iChargers, VBar,
VControl
Old hand at Planks
Peter
Vinger is offline        Reply With Quote Quick reply to this message
Old 03-14-2021, 12:17 AM   #3 (permalink)
Registered Users
Thread Starter Thread Starter
 

Join Date: May 2020
Location: Southern California
Default Problem Solved

Thanks for the reply. Actually that is what I was doing before posting. I didn't mention that I am using a JETI Central Box 210 which requires it's own power supply. It can not be powered via the BEC. Once I hooked the CB210 to its own battery and removed the red wires from the BEC cables, it came on just fine driving the motor through the throttle channel. Now I can move into the specifics of programming. Still learning!
ir3an is offline        Reply With Quote Quick reply to this message
Reply




Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Location
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.

Log-in


Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




Copyright © Website Acquisitions Inc. All rights reserved.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.

SEO by vBSEO 3.6.1