Fun, Learning, Friendship and Mutual Respect START  HERE


Unregistered
Go Back   HeliFreak > R/C Electronics Support > Mikado V-BAR


Mikado V-BAR Mikado V-Stabi/V-BAR Flybarless System Software and Hardware Support


Reply
 
LinkBack Thread Tools Display Modes
Old 03-31-2021, 12:30 PM   #1 (permalink)
Registered Users
 

Join Date: Dec 2013
Default Solved!!!

Every once in a while I decide to try out rescue while I'm inverted just to make sure I remember to use the switch if I ever need it. Yesterday I tried it inverted and low and behold I almost crapped my pants. My logo 700 flipped upright and started to do a tail dive at a high rate of speed. Luckily I was able to override rescue and save it inches from the ground. So then I tried rescue while it was on the ground 3 times and each time I hit rescue the swash jumped up except for the elevator servo, it stayed down which was the result of the tail dive. So I walked 20 feet with my logo 700 and sat it on my picnic table and tried rescue again 5 times and each time it worked perfectly. So I switched to standard from precision on the setup and tapped the neo case and it still did it. I then flew 5 more packs on my logo 700 with no issues until I land and hit rescue and it does the same thing so I know its not the servo. It only happens when I hit rescue. Other than that everything works perfectly. Any help would be appreciated.

Last edited by Wyno; 03-31-2021 at 04:39 PM..
Wyno is online now        Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 03-31-2021, 05:55 PM   #2 (permalink)
Registered Users
 

Join Date: Dec 2014
Location: always windy on the east coast
Default

well, what did you solve?
__________________
a bunch of helis... now all vcontrol and neo..finally :lol
tonys-heli is offline        Reply With Quote Quick reply to this message
Old 04-01-2021, 05:39 AM   #3 (permalink)
Registered Users
 
Posts: 4,261
 

Join Date: Feb 2019
Location: USA::Ohio
Default

I am curious as well. what did you change or whatever to solve this?
__________________
Vcontrol Touch, AccuRC & Heli-X Simulators
Oxy 5 MEG, 4 MAX, 2 (215)
SAB Goblin 500 Sport
XL Power Specter 700
fiddle is online now        Reply With Quote Quick reply to this message
Old 04-01-2021, 12:53 PM   #4 (permalink)
Registered Users
Thread Starter Thread Starter
 

Join Date: Dec 2013
Default

Its something to do with my vcontrol touch. It happens on both my Neo's but doesn't happen with the original vcontrol. Time to send it in for some service.
Wyno is online now        Reply With Quote Quick reply to this message
Old 04-01-2021, 02:30 PM   #5 (permalink)
Registered Users
 
Posts: 4,261
 

Join Date: Feb 2019
Location: USA::Ohio
Default

weird! You might call Mikado USA (https://shop.mikadousa.com/) first to see if there is some software thing. If not then they would handle getting it repaired.
__________________
Vcontrol Touch, AccuRC & Heli-X Simulators
Oxy 5 MEG, 4 MAX, 2 (215)
SAB Goblin 500 Sport
XL Power Specter 700
fiddle is online now        Reply With Quote Quick reply to this message
Old 04-03-2021, 04:16 PM   #6 (permalink)
Registered Users
 

Join Date: Jan 2010
Default

Has this been solved?
__________________
Oxy5: Tribunus 130 V2, BK servos, NEO, Rail 556 / Soon to be Sab Goblin Raw 700, Tribunus 200amp V2, NEO, Xperts KD1's / Logo800, Tribunus 200amp V2, NEO, Xperts KD1's
soangp is offline        Reply With Quote Quick reply to this message
Reply




Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Location
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.

Log-in


Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




Copyright © Website Acquisitions Inc. All rights reserved.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.

SEO by vBSEO 3.6.1