Fun, Learning, Friendship and Mutual Respect START  HERE


Unregistered
Go Back   HeliFreak > For Sale Forums KNOW your buyer/seller ratings! No Price bashing. NO FIREARMS > Electric Helicopters - Only E-Helis


Electric Helicopters - Only E-Helis *No Commercial Ads - E-helis Only


Reply
 
LinkBack Thread Tools Display Modes
Old 05-31-2021, 06:30 PM   #1 (permalink)
Registered Users
 

Join Date: Nov 2010
Default OXY 3 285 Stretch Plus Large TE Parts Lot/Two NIP Canopies

I have an older Oxy 3 (Kit 2) for sale. It has the main frame on it prior to the new sport frame and Tareq frame from 2018. The motor in it is a EOX 2214-4100KV (3s-4s) with a 10T, 11T and 14T pinions (asking $25.00 shipped). I also put KST215MG on cyclic and a MKS HV93i on the tail with a Castle Creations Talon 35 ESC (asking $SOLD) and an Ikon.

When original built as a 255, I had a mishap on a spool up on the fifth or so flight and bent the tail boom, scrapped the original carbon fiber Lynx main blades and damaged the canopy.

I then decided to turn it into a 285 stretch, and put a stretch boom on it, new main shaft, spindle shaft and main gear on it with Lynx 275 plastic yellow main blades. After going over the heli, I flew it three or four more times with no further incident. However, I never took the time to dial in the Ikon and flight settings and the heli has since sat on the shelf.

In aspirations to fly the heli a lot more, I purchased a whole bunch of Tareq Edition orange anodized parts to put on the heli. But never got around to making those changes either. (See attached list.)

SP-OXY3130 Tareq Edition Aluminum Tail Servo Mount Set Orange (On Heli) SOLD
SP-OXY3-107 285 Stretch Tail Boom (NIP) SOLD
SP-OXY3-108 285 Stretch Tail Belt Spare (NIP) SOLD
SP-OXY3-144 Landing Gear White (2 pc) (NIP) SOLD
SP-OXY3-104 Carbon Copolymer Anti-Rotation Guide (NIP) SOLD
LX1807-B Main Grip Black Pro Edition (NIP) SOLD
SP-OXY3-112 Tareq Edition Ultra Main Grips Orange (Opened Never Flown) SOLD
SP-OXY3-116 Tareq Edition Main Shaft Bearing Block Middle Orange (NIP) SOLD
SP-OXY3-115 Tareq Edition Main Shaft Bearing Block Upper Orange (NIP) SOLD
SP-OXY3-118 Tareq Edition Motor Mount Orange (NIP) SOLD
SP-OXY3-121 Tareq Edition Boom Clamp Stiffener Orange (NIP) SOLD
SP-OXY3-119 Tareq Edition Canopy Mount Orange (NIP) SOLD
SP-OXY3-133 Washer Orange (20 pc) (NIP) SOLD
SP-OXY3-128 Tareq Edition Tail Bell Crank Orange (NIP) SOLD
SP-OXY3-123 Tareq Edition Tail Rotor Assembly Orange (NIP) SOLD
SP-OXY3-117 Tareq Edition Main Shaft Bearing Block Lower Orange (NIP) SOLD
SP-OXY3-138 Tareq Edition Motor Mount Stiffener Orange (NIP) SOLD
SP-OXY3-065 Canopy Grommet (4 pc) (NIP) SOLD
SP-OXY3-155 Tail Case Flanged Bearing 3x7x3 (2 pc) (NIP) SOLD
SP-OXY3-067 Main Shaft Bearing Block Service Bag (NIP) SOLD
SP-OXY3-114 Tareq Edition Ultra Swashplate Black and Orange (NIP) SOLD
SP-OXY3-124 Bell Crank Support Black (NIP) SOLD
SP-OXY3-111 Tareq Edition Center Hub Black (NIP) SOLD
SP-OXY3-163 Tareq Edition Guide Pushrod Support (NIP) SOLD
SP-OXY3-024 Tail Rotor Hub Spare (NIP) SOLD
SP-OXY3-004 Main Blade Grip Dampeners Service Bag (2 Set) SOLD
SP-OXY3-018 One Way Sleeve Set (NIP) SOLD
SP-OXY3-080 Tail Shaft 15T (NIP) SOLD
SP-OXY3-051 Break Away Canopy Set (NIP) SOLD
SP-OXY3-037 Servo Linkage (2 sets) (NIP) SOLD
SP-OXY3-045 Tail Servo Mount (NIP)
SP-OXY3-052 Swashplate Leveling Tool (Opened) SOLD
SP-OXY3-001 Steel Main Shaft (1 pc) (Opened Never Used/Other In Heli) SOLD
SP-OXY3-019 Main Gear (1 pc) (Opened Never Used/Other In Heli) SOLD
SP-OXY3-003 Carbon Steel Spindle (1 pc) (Opened Never Used/Other In Heli) SOLD
Lynx OSP-1150 H2-M2 Nut (4 pc) (Opened Never Used/One on Heli) SOLD

Besides including the above listed items I will also include a set of Zeal 285 Carbon Fiber Main Blades (Opened Never Flown), a set of Lynx yellow 275 plastic main blades (Flown On The Heli) SOLD, the Talon ESC SOLD and the motor. 11T and 14T Pinion. Miscellaneous bolts, nuts, screws, washers, blade holder, original swash leveling tool, etc. (See attached pictures.)

I will also include the original damaged canopy. But I have also purchased two NIP canopies that I will include as well. SP-OXY3-167 Green Canopy (SOLD) and OSP-1201, which is the new standard canopy for the OXY 3 SOLD (See attached pictures.)

With the NIP parts, new canopies and new Zeal blades, there is over $400 in spares alone.

Original Ikon. The USB port does not work. Because plugging into it one day it pushed thru. However, there is Crius Ikon blue tooth adapter and cables (IKN605 and IKN607) that will allow it to be linked up to a phone, tablet or computer without the USB port and the included code (See attached pictures). The Ikon was original to this heli with very little use. $70.00 shipped.

I am asking ---------. for the above listed items plus Paypal fees. Shipping can be negotiated.

I have removed the servos (SOLD), but will include them with the sell. They were original to this heli with very little use as well. (See attached pictures.)

Thank you for looking. And please contact me with any questions, etc.
Attached Thumbnails
Click image for larger version

Name:	20210531_140829.jpg
Views:	83
Size:	2.45 MB
ID:	919831   Click image for larger version

Name:	20210531_140921.jpg
Views:	67
Size:	2.87 MB
ID:	919833   Click image for larger version

Name:	20210531_140936.jpg
Views:	82
Size:	2.53 MB
ID:	919835   Click image for larger version

Name:	20210531_140948.jpg
Views:	51
Size:	2.26 MB
ID:	919837   Click image for larger version

Name:	20210531_140811.jpg
Views:	52
Size:	2.19 MB
ID:	919839  

Click image for larger version

Name:	20210531_140800.jpg
Views:	42
Size:	2.89 MB
ID:	919841   Click image for larger version

Name:	20210531_140749.jpg
Views:	40
Size:	2.60 MB
ID:	919843   Click image for larger version

Name:	20210531_135817.jpg
Views:	43
Size:	2.73 MB
ID:	919845   Click image for larger version

Name:	20210531_135259.jpg
Views:	41
Size:	2.70 MB
ID:	919847   Click image for larger version

Name:	20210531_142908.jpg
Views:	61
Size:	3.05 MB
ID:	919849  

Click image for larger version

Name:	20210531_142934.jpg
Views:	58
Size:	2.60 MB
ID:	919851   Click image for larger version

Name:	20210531_142941.jpg
Views:	55
Size:	2.80 MB
ID:	919853   Click image for larger version

Name:	20210531_141149.jpg
Views:	57
Size:	2.60 MB
ID:	919855   Click image for larger version

Name:	20210531_141222.jpg
Views:	44
Size:	2.42 MB
ID:	919857   Click image for larger version

Name:	20210531_141202.jpg
Views:	39
Size:	2.90 MB
ID:	919859  

Click image for larger version

Name:	20210531_141249.jpg
Views:	37
Size:	2.72 MB
ID:	919861   Click image for larger version

Name:	20210531_144105.jpg
Views:	44
Size:	3.17 MB
ID:	919863   Click image for larger version

Name:	20210531_144210.jpg
Views:	35
Size:	2.90 MB
ID:	919865   Click image for larger version

Name:	20210531_151932.jpg
Views:	39
Size:	2.68 MB
ID:	919867   Click image for larger version

Name:	20210531_143558.jpg
Views:	40
Size:	3.44 MB
ID:	919869  

Click image for larger version

Name:	20210531_143525.jpg
Views:	39
Size:	2.90 MB
ID:	919871   Click image for larger version

Name:	20210531_173915.jpg
Views:	33
Size:	3.33 MB
ID:	919873   Click image for larger version

Name:	20210531_174047.jpg
Views:	33
Size:	2.24 MB
ID:	919875   Click image for larger version

Name:	20210531_174057.jpg
Views:	31
Size:	2.48 MB
ID:	919877   Click image for larger version

Name:	20210531_174108.jpg
Views:	27
Size:	2.85 MB
ID:	919879  

Click image for larger version

Name:	20210531_174125.jpg
Views:	33
Size:	3.22 MB
ID:	919881   Click image for larger version

Name:	20210531_201034.jpg
Views:	40
Size:	2.33 MB
ID:	919893   Click image for larger version

Name:	20210531_200610.jpg
Views:	37
Size:	2.97 MB
ID:	919895   Click image for larger version

Name:	20210531_200603.jpg
Views:	30
Size:	2.93 MB
ID:	919897   Click image for larger version

Name:	20210531_200616.jpg
Views:	30
Size:	3.41 MB
ID:	919899  

Click image for larger version

Name:	20210531_200554.jpg
Views:	36
Size:	3.00 MB
ID:	919901  

Last edited by blkrvn1993; 06-13-2021 at 01:39 AM..
blkrvn1993 is offline        Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 06-01-2021, 11:56 PM   #2 (permalink)
Registered Users
 
Posts: 22
 

Join Date: May 2021
Location: Texas
Default Oxy

Still available 512-987-0700
Johnb326 is offline        Reply With Quote Quick reply to this message
Old 06-05-2021, 07:50 PM   #3 (permalink)
Registered Users
Thread Starter Thread Starter
 

Join Date: Nov 2010
Default Oxy 3

Bump
blkrvn1993 is offline        Reply With Quote Quick reply to this message
Old 06-06-2021, 08:52 PM   #4 (permalink)
Registered Users
Thread Starter Thread Starter
 

Join Date: Nov 2010
Default

Have lowered to $300 shipped for everything. Will start parting out in the next few days if no offers.
blkrvn1993 is offline        Reply With Quote Quick reply to this message
Old 06-08-2021, 12:37 AM   #5 (permalink)
Registered Users
Thread Starter Thread Starter
 

Join Date: Nov 2010
Default Oxy 3

Both NIP canopies and the NIP parts have been sold. Thanks to the buyers!!!
blkrvn1993 is offline        Reply With Quote Quick reply to this message
Old 06-10-2021, 06:01 PM   #6 (permalink)
Registered Users
Thread Starter Thread Starter
 

Join Date: Nov 2010
Default Oxy 3

KST 215MG servos SOLD
blkrvn1993 is offline        Reply With Quote Quick reply to this message
Old 06-12-2021, 08:48 PM   #7 (permalink)
Registered Users
Thread Starter Thread Starter
 

Join Date: Nov 2010
Default Items Still For Sale

Following are still for sale. Pics are shown in individual post for sale in "Electric Motors, ESC, etc", "Electronics Gyros" and 'Heli Parts" threads for the items.

Lynx Heli EOX 2214 (4100kV) V2 3S/4S brushless motor. Also, included are a 10T, 11T and 14T pinion for it. Asking $SOLD Shipped

Talon 35 $SOLD shipped.

Original Ikon. The USB port does not work. Because plugging into it one day it pushed thru. However, there is Crius Ikon blue tooth adapter and cables (IKN605 and IKN607) that will allow it to be linked up to a phone, tablet or computer without the USB port and the included code (See attached pictures). The Ikon was original to this heli with very little use. $70 shipped.

The following items are available as well. Asking $SOLD shipped for all of it.

Assembled
SP-OXY3-002 - OXY3 - Center Hub
SP-OXY3-005 - OXY3 - Main Grip, Set
SP-OXY3-008 - OXY3 - Swashplate
SP-OXY3-006 - OXY3 - DFC Arm, Set

Assembled
SP-OXY3-023 - OXY3 - Tail Rotor Assembly
SP-OXY3-030 - OXY3 - Tail Case Bearing Block Assembly
SP-OXY3-026 - OXY3 - Bell Crank Support
SP-OXY3-027 - OXY3 - Tail Pitch Slider
SP-OXY3-080 - OXY3 - Tail Shaft 15T
SP-OXY3-031 - OXY3 - Vertical Fin
SP-OXY3-032 - OXY3 - Tail Case Cover
SP-OXY3-033 - OXY3 - Tail Bell Crank
SP-OXY3-034 - OXY3 - Tensioner Tail Belt

SP-OXY3-010 - OXY3 - Upper Main Shaft Bearing Block
SP-OXY3-011 - OXY3 - Middle Main Shaft Bearing Block
SP-OXY3-012 - OXY3 - Lower Main Shaft Bearing Block
SP-OXY3-013 - OXY3 - Motor Mount

Last edited by blkrvn1993; 06-15-2021 at 12:36 PM..
blkrvn1993 is offline        Reply With Quote Quick reply to this message
Reply




Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Location
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.

Log-in


Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




Copyright © Website Acquisitions Inc. All rights reserved.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.

SEO by vBSEO 3.6.1