Fun, Learning, Friendship and Mutual Respect START  HERE


Unregistered
Go Back   HeliFreak > R/C Electronics Support > Mikado V-BAR


Mikado V-BAR Mikado V-Stabi/V-BAR Flybarless System Software and Hardware Support


Reply
 
LinkBack Thread Tools Display Modes
Old 06-14-2021, 01:26 AM   #1 (permalink)
Registered Users
 
Posts: 97
 

Join Date: Feb 2011
Default Vbar NEO - strange behaviour

Hi, all

Last weekend my G700 demostrated unusual behavior after plugging batteries - after about 40 seconds, all servos are randomly moved without any input from my radio.

After power cycle everything looks like normal, one more flight without any troubles.

Any ideas?

The log is (in 2 seconds there are a lot of events ):

OK 0:00 Reset Reason: Power On

Info 0:00 Bank 2 Loaded

Info 0:00 External Sensor data available and used

Info 0:00 Motor Switch operated to Idle bailout
Info 0:01 Bank 1 Loaded
Info 0:01 Motor Switch operated to OFF
Info 0:03 Calibration Finished
OK 0:13 Good Health Message (10sec)
OK 0:23 Good Health Message (10sec)
OK 0:33 Good Health Message (10sec)
Info 0:40 Bank 1 Loaded
Info 0:40 Bank 2 Loaded
Warn 0:40 The Cyclic Ring is active
Info 0:40 Rescue has been activated
Info 0:40 Motor Switch operated to OFF
Info 0:40 Motor Switch operated to Idle bailout
Info 0:40 Motor Switch operated to ON
Info 0:41 Bank 1 Loaded
Info 0:41 Bank 2 Loaded
Info 0:41 Bank 3 Loaded
Warn 0:41 The Cyclic Ring is active
Info 0:41 Rescue has been activated
Info 0:41 Motor Switch operated to OFF
Info 0:41 Motor Switch operated to Idle bailout
Info 0:41 Motor Switch operated to ON
Info 0:42 Bank 1 Loaded
Info 0:42 Bank 2 Loaded
Info 0:42 Bank 3 Loaded
Warn 0:42 The Cyclic Ring is active
Info 0:42 Rescue has been activated
Info 0:42 Motor Switch operated to OFF
Info 0:42 Motor Switch operated to Idle bailout
Info 0:42 Motor Switch operated to ON
Info 0:43 Bank 1 Loaded
Info 0:43 Bank 2 Loaded
Info 0:43 Bank 3 Loaded
Warn 0:43 The Cyclic Ring is active
Info 0:43 Rescue has been activated
Info 0:43 Motor Switch operated to OFF
Info 0:43 Motor Switch operated to Idle bailout
Info 0:43 Motor Switch operated to ON
Info 0:44 Rescue has been completed
Warn 0:44 Rescue has been oversteered by the Pilot
OK 0:54 Good Health Message (10sec)
OK 1:04 Good Health Message (10sec)
OK 1:14 Good Health Message (10sec)
glushkov is offline        Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 06-14-2021, 06:52 PM   #2 (permalink)
Registered Users
 

Join Date: Feb 2009
Location: Montreal
Default

Quote:
Info 0:40 Rescue has been activated
By any chance did you activate RESCUE ?
mdu6 is offline        Reply With Quote Quick reply to this message
Old 06-15-2021, 02:59 AM   #3 (permalink)
Registered Users
 
Posts: 11,741
 
My HF Map location
Join Date: Sep 2007
Default

All the RESCUE activation will cause that. Motor switch to on and off also strange, did you switch both these?
__________________
Henseleit TDR, TDR2, TDF, TDS, TDSF
Kontronik, Scorpion ESC, iChargers, VBar,
VControl
Old hand at Planks
Peter
Vinger is online now        Reply With Quote Quick reply to this message
Reply




Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Location
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.

Log-in


Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




Copyright © Website Acquisitions Inc. All rights reserved.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.

SEO by vBSEO 3.6.1