Register Now

wemo · 11-13-2021, 04:38 PM

So Ive been the 750 in all of my birds and Ive been using the r7008sb. Well I bought the last 750 from someone creditable. I hooked it up as I build up one of my scale 700 birds. The receiver I decided to use was my R2008Sb S-FHSS HV. When I plugged everything in there was no sensor movement at all. I tried another sensor from another unit... nothing. I even tried another control box...NOTHING. Since I had an extra R6202SB so I bind it and Viola! The sensor had movement for all servos. I knew you have to use a Sbus channel and NOT a sBub2 but I thought any Rx mentioned in my 16SZ manual would wrong. It may wrong but the R2008SB didnt work with both 750 units I had.

Phaedrus · 11-13-2021, 05:03 PM

There is no reason the R2008SB would not work unless it was connected incorrectly. Not sure what you mean by "sensors". Servos perhaps??

wemo · 11-13-2021, 06:32 PM

what i mean is the gyro sensor itself that plugs into the unit

11-13-2021, 04:38 PM	#1 (permalink)
wemo Registered Users Join Date: Aug 2015	Receivers make a difference So Ive been the 750 in all of my birds and Ive been using the r7008sb. Well I bought the last 750 from someone creditable. I hooked it up as I build up one of my scale 700 birds. The receiver I decided to use was my R2008Sb S-FHSS HV. When I plugged everything in there was no sensor movement at all. I tried another sensor from another unit... nothing. I even tried another control box...NOTHING. Since I had an extra R6202SB so I bind it and Viola! The sensor had movement for all servos. I knew you have to use a Sbus channel and NOT a sBub2 but I thought any Rx mentioned in my 16SZ manual would wrong. It may wrong but the R2008SB didnt work with both 750 units I had.

11-13-2021, 05:03 PM	#2 (permalink)
Phaedrus Registered Users My HF Map location Join Date: Aug 2005	There is no reason the R2008SB would not work unless it was connected incorrectly. Not sure what you mean by "sensors". Servos perhaps?? __________________ Team Futaba - Kontronik Futaba 32MZ/18MZ/18SZ/16SZ - CGY760 and 755

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-13-2021, 06:32 PM	#3 (permalink)
wemo Registered Users Thread Starter Join Date: Aug 2015	what i mean is the gyro sensor itself that plugs into the unit

Register Now

Log-in