Lynx Goblin 380 Swashplate Fits Loose

[sawacs]

I just received the Lynx Goblin 380 upgraded swash plate and have a concern.

The swash plate appears to fit too loose on the main shaft. I checked the stock swash plate then the Lynx swash plate multiple times and sure enough the Lynx is rather loose. If I move the Lynx swash plate side to side on the main shaft, I can clearly see the movement.

Here is a description of what happens. If I place the stock SAB swash plate onto the top of the main shaft and release it, the SAB swash plate takes a couple of seconds to slide to the bottom due to the tighter tolerances. However, if I do the same with the Lynx swash plate, the slide to the bottom portion of the shaft is instant as in it just plops down to the bottom.

Is this normal or do I need to return the swash plate for another.

Thanks...

[RichKnapp]

Something don't sound right.

You can make a ticket on the site and I'm sure they will work with you on whats up.

[sawacs]

Agreed and thank you.

I went ahead and returned the swash plate with the intent on picking up another one after the first few test flights with the stock setup.

Cheeers