Register Now

joliecoeur13 · 03-28-2017, 09:52 PM

I have a used 250 coming , needs servos but it has a micro Brain with the (JST ?) plugs ... wondering if there is any decent servo with that plug available ?

TR450ZS · 03-29-2017, 05:00 AM

Servo weight and geometry can be tricky on a 250. Your best bet is to use stock align servos and get the MSH adapter plugs.

yakky · 03-29-2017, 07:08 AM

KST makes some decent smaller sized servos for the 250, I forget what the model number is but the HobbyKing version is the 213:

https://hobbyking.com/en_us/turnigyt...07sec-16g.html

joliecoeur13 · 03-29-2017, 08:25 AM

Quote:

Originally Posted by yakky

KST makes some decent smaller sized servos for the 250, I forget what the model number is but the HobbyKing version is the 213:

https://hobbyking.com/en_us/turnigyt...07sec-16g.html

actually I have some 213's I guess I'll use the adapter thing ...

yakky · 03-29-2017, 08:45 AM

Quote:

Originally Posted by joliecoeur13

actually I have some 213's I guess I'll use the adapter thing ...

Those adapters are pretty bulky, especially on a 250. I'd crack open the servos and solder new wires with the right plugs.

joliecoeur13 · 03-29-2017, 10:23 PM

check these puppies out !! 8gr , a bit spendy for me

http://alofthobbies.com/kst-x08-serv...c-8-grams.html

bazsound · 04-04-2017, 01:11 AM

Quote:

Originally Posted by joliecoeur13

check these puppies out !! 8gr , a bit spendy for me

http://alofthobbies.com/kst-x08-serv...c-8-grams.html

those cost almost the same amount of £ as they are $ here in the UK so even more expensive. £37 each!!! yikes around £100 for 3. Think ill just live with the extra weight my 213c servos have.

there also not the fastest servos

myxiplx · 04-04-2017, 01:18 AM

Not aware of any servos that would fit a 250 that use those micro plugs.

But you can buy Spektrum satellite wires in bulk off eBay and solder new leads on to a standard servo.

03-28-2017, 09:52 PM	#1 (permalink)
joliecoeur13 Registered Users Join Date: Feb 2010	250 servo choice I have a used 250 coming , needs servos but it has a micro Brain with the (JST ?) plugs ... wondering if there is any decent servo with that plug available ? __________________ DIABOLO - Spirit goblin 500 Sport-- Spirit

03-29-2017, 05:00 AM	#2 (permalink)
TR450ZS Registered Users My HF Map location Join Date: Apr 2013	Servo weight and geometry can be tricky on a 250. Your best bet is to use stock align servos and get the MSH adapter plugs. __________________ Allan TREX 250 PRO,Talon15, GPRO, Zeal ----TREX 500 EFL PRO, GPRO, RAILS ----2x TREX 450PRO V2, 1xGPRO&1xBRAIN, Talon35, RAIL , Zeal ---- SAVOX powered TREX500 EFL in Roban scale UH1-N ---- TREX 600 EFL PRO, GPRO, RAILS ---- DX9 ----

03-29-2017, 10:23 PM	#6 (permalink)
joliecoeur13 Registered Users Thread Starter Join Date: Feb 2010	check these puppies out !! 8gr , a bit spendy for me http://alofthobbies.com/kst-x08-serv...c-8-grams.html __________________ DIABOLO - Spirit goblin 500 Sport-- Spirit

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-29-2017, 07:08 AM	#3 (permalink)
yakky Registered Users Join Date: Feb 2015	KST makes some decent smaller sized servos for the 250, I forget what the model number is but the HobbyKing version is the 213: https://hobbyking.com/en_us/turnigyt...07sec-16g.html

04-04-2017, 01:18 AM	#8 (permalink)
myxiplx Registered Users Join Date: Apr 2013	Not aware of any servos that would fit a 250 that use those micro plugs. But you can buy Spektrum satellite wires in bulk off eBay and solder new leads on to a standard servo.

Register Now

Log-in