Fun, Learning, Friendship and Mutual Respect START  HERE
Register FAQ PM Events Groups Blogs Calendar Mark Forums Read


Unregistered
Go Back   HeliFreak > R/C Helicopter Support > 450 Class Electric Helicopters
Reload this Page Align DS416M servo problem


450 Class Electric Helicopters 450 Class Electric Helicopters manufactured by Align, Tarot, SYMA, Airhog, Chaos, HK and similar.


Reply
 
LinkBack Thread Tools Display Modes
Old 04-12-2017, 11:25 PM   #1 (permalink)
Registered Users
 

Join Date: Feb 2014
Default Align DS416M servo problem
had a crash got a new servo gear set. well the servo dont work. just a buzzing sound
so to check if i put the gears back the right way. i looked at a good working DS416 all i did is took the cover off carefully just to take a look
at the gears put the servo back on the heli now that servo dont work. WTF
i have put gear sets in align servos back in the day and never had this problem have no clue what the problem is.
fedexguy is offline        Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 04-15-2017, 08:42 AM   #2 (permalink)
Registered Users
 
Posts: 2,081
 
My HF Map location
Join Date: Mar 2011
Default
With all the gears removed does the motor spin when powered up?


Steve
__________________
///-------TEAM FLYBAR-------///
ERRATIC is offline        Reply With Quote Quick reply to this message
Old 04-16-2017, 06:14 AM   #3 (permalink)
Registered Users
 
Posts: 6,440
 

Join Date: May 2012
Default Align DS416M servo problem
Make sure none of the pins got pulled out when you took the top cover off of the working gear. Also make sure the gears are fully seated.
Last edited by CrashNburn420; 04-16-2017 at 11:01 AM..
CrashNburn420 is offline        Reply With Quote Quick reply to this message
Old 04-16-2017, 09:00 AM   #4 (permalink)
Registered Users
 
Posts: 2,081
 
My HF Map location
Join Date: Mar 2011
Default
Adding to what CrashNburn posted.
Check the pin bearings in the top cover, many times they will crack causing the shaft to pull out of alignment.

Clean the cover and inspect it closely. Also never over tighten the case screws.


Steve
__________________
///-------TEAM FLYBAR-------///
ERRATIC is offline        Reply With Quote Quick reply to this message
Reply



« Previous Thread | Next Thread »

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
 Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Location
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.

Log-in


Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



Copyright © Website Acquisitions Inc. All rights reserved.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Copyright - Advertising - Contact Us - HeliFreak.com - Privacy Statement - Top

SEO by vBSEO 3.6.1