Blade CPS Transmitter settings

[Rmv221]

I have the .Blade CPS and I want to learn to do some 3D maneuvers. I have the Spektrum Dx7s. Does anyone have some great settings that I can input and learn how to start flying 3D at a starting level?

[howaboutme]

I'm relatively new too and started to get comfortable w/ agility mode. I started out w/ something like below:

For Aileron/Elev/Rudder:
DR: 60
Expo: 40

Then I slowly bumped up DR and lowered Expo

For throttle curve I used something like this:
80,65,60,65,80
Then I bumped it up slowly as my skills got better

For pitch:
I chose to soften up mid-stick w/ an S-curve:
0,30,50,70,100
I started w/ a pure linear curve but thought this was better for me.

Good luck!

[Liduno]

Originally Posted by howaboutme

I'm relatively new too and started to get comfortable w/ agility mode. I started out w/ something like below:

For Aileron/Elev/Rudder:
DR: 60
Expo: 40

Then I slowly bumped up DR and lowered Expo

For throttle curve I used something like this:
80,65,60,65,80
Then I bumped it up slowly as my skills got better

For pitch:
I chose to soften up mid-stick w/ an S-curve:
0,30,50,70,100
I started w/ a pure linear curve but thought this was better for me.

Good luck!

You're doing 3D with those dual rates and expo?

[howaboutme]

Originally Posted by Liduno

You're doing 3D with those dual rates and expo?

Not with those. I've since bumped DR up and expo down to start flips (can't do anything else) because I realized it wasn't responsive enough.

I am assuming OP has limited experience in agility mode though and those were the settings I used to get comfortable and allowed me to do that indoors.

Good question though, I should have clarified.