START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
Multi Rotor Helicopters - Tandem Multi Rotor Helicopters - Tandem |
|
LinkBack | Thread Tools | Display Modes |
07-25-2013, 08:28 AM | #1 (permalink) |
Registered Users
Join Date: Mar 2012
|
Motor/ESC Recommendations
Hello;
I am contemplating buying a Sky-Hero Spyder. It can be configured as a 8 motor machine in a quad arm configuration. It is a 700mm machine. It can accommodate 28mm to 36mm motor sizes. My plan is to sell my DJI 550 but keep the electronics and transfer them to this machine. Can someone recommend a descent motor and esc configuration for this machine? Looking for props as well. Thanks!
__________________
/Hal ____________________________________________ Goblin Kraken, Goblin RAW - VBar Neo MIKADO VControl Touch | iCharger 406 Duo | Meanwell RSP-1500W-24V |
Sponsored Links | |||
Advertisement |
|
07-25-2013, 01:41 PM | #2 (permalink) |
Registered Users
Join Date: Sep 2011
|
I am running some NTM 2630 800kv motors on my DJI550 frame with 10x4.7 props, very nice motor and under $20 with prop adapter, they would be nice on a bigger frame with bigger props as they are rated at 300 watts.
__________________
similis vobis fugere eam furatus "The beatings will continue until morale improves." -- William Bligh |
07-29-2013, 10:09 AM | #3 (permalink) |
Registered Users
Join Date: Nov 2006
|
quad 8, which FC will support this config, my knoedge Apm support this, will Naza support quad8?
__________________
|
07-29-2013, 10:27 AM | #4 (permalink) |
Registered Users
Thread Starter
Join Date: Mar 2012
|
Naza and Wookong-M supports a X8 and Y6 configurations.
__________________
/Hal ____________________________________________ Goblin Kraken, Goblin RAW - VBar Neo MIKADO VControl Touch | iCharger 406 Duo | Meanwell RSP-1500W-24V |
Thread Tools | |
Display Modes | |
|
|