Register Now

Mr.Andersen · 07-01-2017, 05:27 PM

Good it only was the shaft these time, but when you say hot, how hot do you think the motor get?
Scorpions can get hot if run with wrong timings and wrong PWM but then they guzzle power to.
At least the one sitting in my Warp do not run hot and is plenty strong.

PassinThru · 04-30-2018, 04:04 PM

I’ve read several posts stating that Scorpion motors tend to run hot. No doubt esc settings can minimize this though playing with the PWM hasn’t cooled the Scorpion on my Logo 600. The Scorpion on my Gaui X5 stays relatively cool.

07-01-2017, 05:27 PM	#21 (permalink)
Mr.Andersen Registered Users Join Date: Jun 2008 Location: Trondheim Norway	Good it only was the shaft these time, but when you say hot, how hot do you think the motor get? Scorpions can get hot if run with wrong timings and wrong PWM but then they guzzle power to. At least the one sitting in my Warp do not run hot and is plenty strong. __________________ Logo 600SX Warp 360 Chase 360 Exo 500

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-30-2018, 04:04 PM	#22 (permalink)
PassinThru Registered Users Join Date: Nov 2010	I’ve read several posts stating that Scorpion motors tend to run hot. No doubt esc settings can minimize this though playing with the PWM hasn’t cooled the Scorpion on my Logo 600. The Scorpion on my Gaui X5 stays relatively cool.

Register Now

Log-in