START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
Low Head Speed Helicopters Low Head Speed Helicopter Setups and Flying info |
|
LinkBack | Thread Tools | Display Modes |
09-28-2016, 04:24 PM | #1 (permalink) |
Registered Users
Join Date: Jan 2012
|
780 Align blades on MSH Protos V2 - Spirit FBL
Hi All,
Anyone flying 780 align's or similar (e.g. 766 rails) on Protos V2 with Spirit FBL? Just curious ... I moved from 710 Switches (love those!) at 1950 RPM to Align 780's at 1400 RPM for kicks and to try something different. Not bad at all - but not very "locked in" right now. I have to be careful with collective of course, elevator wobble is present and I can get the tail to deviate from its heading hold position on full deflection of the cyclic - e.g punch out / rainbow @ full noise. I'd appreciate knowing if anyone else is running the Spirit - maybe we can swap rough guidelines for setup. Cheers - keep those blades AWAY from mother earth!
__________________
-- Goblin 570, Protos Max V2's, TDF in the queue - Brain 2 goodness on each, with Jeti DS-14 telling it all what to do... And remember - If it ain't broke, you need to tinker with it. |
Sponsored Links | |||
Advertisement |
|
09-28-2016, 04:58 PM | #2 (permalink) |
Registered Users
Join Date: Jan 2009
Location: NorCal
|
Mine is Brain, but I fly at 1350 for 9 minutes and it's incredible. Same blades.
|
09-29-2016, 01:38 AM | #3 (permalink) |
Registered Users
Thread Starter
Join Date: Jan 2012
|
Yup - makes sense. Before I did the Protos V2 I had a Synergy E7SE on a similar setup - 10 minutes no problem at lower head speeds, I also flew that on 6S quite a bit - very different experience (in fact I recall I maidened it on 6s - lol).
The Synergy E7SE now sits on the wall - its internals were ripped out to put into a Protos Max V2 - as somehow the E7 didn't grab me and make we want to fly it.
__________________
-- Goblin 570, Protos Max V2's, TDF in the queue - Brain 2 goodness on each, with Jeti DS-14 telling it all what to do... And remember - If it ain't broke, you need to tinker with it. |
09-29-2016, 05:30 PM | #4 (permalink) |
Registered Users
Join Date: Jan 2015
|
Are you using the Spirit for gov?
__________________
MSH Protos Xpert-Xnova-Jeti |
09-30-2016, 02:16 AM | #5 (permalink) |
Registered Users
Thread Starter
Join Date: Jan 2012
|
Nope. I've seen too many people having problems with that. I'm experimenting with Brain 2 now that it has Jeti and rescue.
__________________
-- Goblin 570, Protos Max V2's, TDF in the queue - Brain 2 goodness on each, with Jeti DS-14 telling it all what to do... And remember - If it ain't broke, you need to tinker with it. |
Thread Tools | |
Display Modes | |
|
|