 |
START HERE |
|
| Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
|
|
|
Unregistered
|
||||||
| NX4 Discussion and support of the Gaui NX4 Nitro Helicopter |
|
|
 |
|
|
LinkBack | Thread Tools | Display Modes |
02-14-2017, 07:19 PM
|
#1 (permalink) |
|
Registered Users
Join Date: Apr 2014
|
Anti Vibe FBL Mounting plate.. Everyone Using it???
Hi guys. I'm new to the Nx4 but not new to isolating Vibes. Is everyone using the metal anti vibe plate on the NX4? What are your findings? Thanks in advance
__________________
AMA # 1121783 CITIZEN 816 You cant pass if you choose to follow !!!! .OLD..HOUSE..6 KIDS..= WISHFUL THINKING |
|
|
| Sponsored Links | |||
|
Advertisement |
|
||
|
02-14-2017, 07:54 PM
|
#2 (permalink) |
|
Registered Users
Join Date: Mar 2006
|
I'm using the plate and the gaui mini V. It seems to work Fine, although I haven't tried it any other way. I figured that gaui spent the time and effort to find an answer for the vibration problem, why should I waste any time and fuel trying to find another solution. It works !
__________________
I made a mistake once, but I was wrong... |
|
|
|
|
02-14-2017, 08:36 PM
|
#3 (permalink) |
|
Registered Users
Thread Starter
Join Date: Apr 2014
|
+1 to that. My thoughts as well. I appreciate your input.
__________________
AMA # 1121783 CITIZEN 816 You cant pass if you choose to follow !!!! .OLD..HOUSE..6 KIDS..= WISHFUL THINKING |
|
|
|
|
02-14-2017, 10:13 PM
|
#4 (permalink) |
|
Registered Users
Join Date: Mar 2006
|
No problem, any time.
__________________
I made a mistake once, but I was wrong... |
|
|
|
|
02-17-2017, 03:42 PM
|
#5 (permalink) |
|
Registered Users
Join Date: Jul 2009
|
The metal plate was only put there because the Mini V-bar was not designed for nitro use.
If you are using a full size V-bar, or better still, a Neo, or something else like an Icon or Spartan Vortex, you won't need the plate. It's only needed if using a mini V.
__________________
TDRx2, Synergy N7/E7se/N5cTT, Align 450L/550/700e/700n, Gaui NX7/NX4, , Goblin 700/Black Nitro, Futaba 18MZ/ V-Control All on V-Bar's and S-Bus. #0095 |
|
|
|
|
02-17-2017, 05:04 PM
|
#6 (permalink) |
|
Registered Users
Join Date: Jun 2016
|
It's helped in electrics with vibes but never tried in nitro application
Good luck
__________________
Écureuil AS355n.50 600mm - Lynx 450xl ntm1700kv 350mm- KDS Chase 360mm Scorpion 1880kv SK720be/Ikon |
|
|
|
|
02-17-2017, 05:58 PM
|
#7 (permalink) |
|
Registered Users
Join Date: Mar 2006
|
Similar metal plate setup was used on Futaba GY611 Gyros. I still have one of those in service.
Zeal Tape was a cure used for vibration with gyros. I have some of that still in service too.
__________________
I made a mistake once, but I was wrong... |
|
|
|
|
|
|
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Linear Mode
|
|
