START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
MA Glow Miniature Aircraft Glow Helicopter Support Forum |
|
LinkBack | Thread Tools | Display Modes |
Sponsored Links | |||
Advertisement |
|
06-20-2008, 02:43 PM | #2 (permalink) |
Registered Users
Join Date: Aug 2004
|
Hi John
Great videos. must have taking alot of time. ChopperKnud
__________________
ChopperKnud, Team Heliwholesaler - Team Miniature Aircraft ThePitchbrothers.com |
06-22-2008, 03:24 PM | #3 (permalink) |
Registered Users
Join Date: Aug 2004
|
hi,
I was wondering how many drill up the hole in the upper Collet? And is it also necessary for the YS91SR? ChopperKnud
__________________
ChopperKnud, Team Heliwholesaler - Team Miniature Aircraft ThePitchbrothers.com |
06-23-2008, 03:11 AM | #4 (permalink) |
HF Support
Thread Starter
Join Date: Sep 2006
|
Good question! - I feel that the OS shaft may be slight bigger on the later versions of the SZ - I really couldn't make ANY adjustments with it tight - as for the YS - I have no idea
__________________
John |
06-23-2008, 01:38 PM | #5 (permalink) |
Registered Users
Join Date: Aug 2004
|
Hi John,
I will unmount my fan on my YS91SR I'll let you know the size of the collets and the cranckshaft thread. PS: is it best the measure the dial out/alignment, on the top on on the side of the fan? ChopperKnud
__________________
ChopperKnud, Team Heliwholesaler - Team Miniature Aircraft ThePitchbrothers.com |
06-23-2008, 01:48 PM | #6 (permalink) |
Registered Users
|
I think its best to do it on the inside. A maryland fan would be even better.
__________________
Logo 800/Jeti DS16 |
06-23-2008, 06:20 PM | #7 (permalink) |
Registered Users
Join Date: Sep 2007
|
Thanks for these vids, I have picked up some great pointers. Really appreciated!
|
06-24-2008, 04:26 AM | #8 (permalink) | |
HF Support
Thread Starter
Join Date: Sep 2006
|
Quote:
I think both YS and OS shafts are 8mm but the taps are imperial (5/16x28) on the OS and metric (8mmx1) on the YS". It seems the position of the start of the tap from the front bearing that is critical and slightly longer in the YS.
__________________
John |
|
06-25-2008, 06:30 AM | #9 (permalink) |
Registered Users
|
Great vids! Please keep up the good work. Looking forward to seeing the finished product.
|
10-11-2008, 07:05 PM | #10 (permalink) |
Registered Users
Join Date: Dec 2007
|
is the high ratio stratus on the MA site the bobby watts special version? thanks in advance.
http://www.miniatureaircraftusa.com/...rod=1026%2D2BW
__________________
600N 8917HV's spartan 760/8900G OS 55HZ/hatori SAB-55 AR7100r switchglow 700N 8717HV's spartan 760/8900G OS 91HZ/hatori SB-20 AR7100r switchglow, 690 slick V2 V's 90SG 8717HVs spartan 760/8900G OS 91HZ/hatori SB-20 AR7100r switchglow, 710 slick V2 V's |
10-11-2008, 09:00 PM | #11 (permalink) |
HF Support
Thread Starter
Join Date: Sep 2006
|
Not sure - think it might be the regular Startus with gearing for the YS engine - the MA site not always the easiest to navigate - check out Ron's Heliproz - he lists it
__________________
John |
10-11-2008, 09:56 PM | #12 (permalink) |
Registered Users
Join Date: Dec 2007
|
thanks for the link
__________________
600N 8917HV's spartan 760/8900G OS 55HZ/hatori SAB-55 AR7100r switchglow 700N 8717HV's spartan 760/8900G OS 91HZ/hatori SB-20 AR7100r switchglow, 690 slick V2 V's 90SG 8717HVs spartan 760/8900G OS 91HZ/hatori SB-20 AR7100r switchglow, 710 slick V2 V's |
10-13-2008, 02:54 PM | #13 (permalink) |
Registered Users
|
Did you replace anything on the heli yet?
__________________
Logo 800/Jeti DS16 |
10-13-2008, 11:35 PM | #14 (permalink) |
Registered Users
Join Date: Dec 2007
|
are you asking me? I was just looking at the entire kit, I was thinking about buying a stratus, but I don't have an older one I am looking to convert to a BW stratus
__________________
600N 8917HV's spartan 760/8900G OS 55HZ/hatori SAB-55 AR7100r switchglow 700N 8717HV's spartan 760/8900G OS 91HZ/hatori SB-20 AR7100r switchglow, 690 slick V2 V's 90SG 8717HVs spartan 760/8900G OS 91HZ/hatori SB-20 AR7100r switchglow, 710 slick V2 V's |
10-14-2008, 04:51 AM | #15 (permalink) |
HF Support
Thread Starter
Join Date: Sep 2006
|
It's a great kit and strong as nails - did a bad dumb thumb in rotor first doing funnels too low in bad light and aprt from the usual bent shaft and popped links there's very little damage - did the mother of all chicken dances due to the radio getting popped but even so the T700 flyers were amazed at no frame or gear damage.
__________________
John |
03-05-2009, 06:15 PM | #16 (permalink) |
Join Date: Jan 2008
|
stratus 90 help!
if you can give me tips on setting up my bird? radio gear is all futaba dig. servos 2.4ghz rec. multigov ver.1! please help me set this up! my radio is a futaba t9chp! i need all the help i can get! there are nobody here at these flying fields that know too much about these aircrafts! it would be greatfully appreciated! thank you markus d. debose!
|
03-06-2009, 08:09 AM | #17 (permalink) |
Registered Users
|
What do you want to know? Building and setting it up is pretty straightforward.
__________________
Logo 800/Jeti DS16 |
03-06-2009, 08:18 AM | #18 (permalink) |
Registered Users
Join Date: Feb 2008
|
MA is out of Sorrento, FL. How far is Clearwater, FL from Sorrento, FL? I would love to visit MA in Sorrento one day.
__________________
Member AMA Virginia Flyers - virginiaflyers.com |
08-14-2010, 11:14 AM | #19 (permalink) |
|
John, With the help of your vid's, I just finished my BW Stratus build. Well done my friend, and a huge help as the instructions included in the kit aren't the best. Now its time for final set up of the head and flybar and then the break in. Thanks again for a great job on the vid's...
|
Thread Tools | |
Display Modes | |
|
|