Spanwise cg question

[Scoobalimalima]

I have 4x 700 blades that I am in the process of balancing, all 4 are very close in weight so matching that is no issue, my problem is that as far as the span wise cg's are concerned I basically have two matched pairs but the deviation between the pairs is quite large, about 12mm difference, It will require A LOT of tape to match all 4. My question is, as long as I match each pair, all 4 are the same weight and each pair are opposite each other on the head, will that work? I can't imagine it will cause a vibe issue, but would it effect tracking? I see it as like a flybar head, with two matched pairs opposite each other.

Any info would be much appreciated.

Cheers,

SLL

[Johnny31297]

That works.