Throttle hold switch to arm hyper 400

[Carder]

Using a dx8 saw people post to arm with the throttle hold switch

I don't want any different flight mode just 3d and be able to arm with throttle hold switch

U can PM or call me at 740-525-0322 or text name is josh
Thanks

Do u need to u airplane or helicopter setup

[canadianmulti]

You can use airplane mode. Set one of your aux channels to be controlled by the switch you want, then in the mode control menu on baseflight, put a check mark in the arm box of the position you wish the switch to be in to arm, the other position of the switch will disarm

[Carder]

I can't find the way to use the throttle hold switch on my dx8
But I saw people post to arm with it. But under switch setup in dx8 that switch is not listed to use so how did they get it set that way

[cajkat1073]

In the dx8 if you are not using the f mode switch at all than go to throttle cut. It may be in the advanced menu. Just turn on throttle cut on the hold switch. It will say something like -130 just leave that alone.

[Carder]

Got it didn't look and see the throttle hold switch was called mix


Got it had dumb ass attack looked at switch and saw it labeled mix then the green light came on

[cajkat1073]