START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
X5 Discussion and support of the Gaui X5 |
|
LinkBack | Thread Tools | Display Modes |
04-15-2013, 08:56 PM | #101 (permalink) |
Registered Users
Join Date: Jul 2009
|
Snap!
__________________
i1 |
Sponsored Links | |||
Advertisement |
|
07-04-2013, 05:10 PM | #102 (permalink) |
Registered Users
|
Noticed a problem a couple days ago, and 6 packs later, same issues.
Its drifting to the right. It initialized fine (ar7200bx) on a nice still flat surface. It will hold a hands off hover for about 3 seconds and it starts rolling away to the right. Not a wind thing, did the reverse nose in...etc. I wonder if its always done it and i just dont keep it in one spot long enough to notice, but I think i would have noticed on my maiden. Pots 1 and 2 are 1 tick + on my BX. I let it sit in the sun for 4 450 packs to be sure temp change/humidity couldnt cause it (old gy401 days, worth a shot). Same. I removed the velcro i had around the BX, no change. New pack, different CG (better), no change. Anybody thing running thru the bx setup again would help? I have a new swash that i could swap for my old style one if im going to do it all anyway. **edit, made some changes, new swash, releveled, upped my gain to 37.5% (DX8) and its much better.
__________________
Gaui X5! Gaui X3! Outrage G5 Blade mCPX BL | MultiWii Quadrotor Last edited by branflake; 07-04-2013 at 10:29 PM.. |
07-04-2013, 08:31 PM | #103 (permalink) |
Registered Users
Join Date: Jun 2009
|
What motor is that?
__________________
Hirobo Evo .50/Futaba 9C/OS 50 Hyper & Hatori/Radix/GV1/GY401&9254/9252s/Arizona Heli Canopy Trex 500 FBL/Futaba 8FGS/CGY750/CC ICE 75 & Scorp 1400 16T/Radix/9650s/9256 Trex 450 Pro/Futaba 8FGS/450M 14T/TP Blades/ 3156s/ Futaba GY520&9257 |
Thread Tools | |
Display Modes | |
|
|