HELP: Cinestar8 Mikrocopter > DJI Wookong M conversion?

aaron07 · 07-15-2013, 09:33 PM

We have a Cinestar 8 currently running Mikrocopter electronics, but I am interested to find out if anyone has swapped out Mikrocopter for DJI Wookong M electronics on the Cinestar 8 airframe.

I am interested to know what is involved with this conversion and what the pros and cons are with regards to the installation.

Any experienced advice would be greatly appreciated ;-)

aaron07 · 07-30-2013, 08:32 PM

Well after no response, I'll post my own experience in the near future for those interested, if any...

300c · 08-01-2013, 12:17 AM

I know a guy named chad who is in the middle of this conversion the biggest problem is converting or getting the layout right using a distribution board with Dji 30 a esc's

300c · 08-03-2013, 12:55 AM

We did a test flt today and it flies way better than the microkopter and GPS lock was within 6 inches. We very happy with the Wookong system

07-15-2013, 09:33 PM	#1 (permalink)
aaron07 Registered Users My HF Map location Join Date: Feb 2007 Location: Sydney City, Australia	HELP: Cinestar8 Mikrocopter > DJI Wookong M conversion? We have a Cinestar 8 currently running Mikrocopter electronics, but I am interested to find out if anyone has swapped out Mikrocopter for DJI Wookong M electronics on the Cinestar 8 airframe. I am interested to know what is involved with this conversion and what the pros and cons are with regards to the installation. Any experienced advice would be greatly appreciated ;-) __________________ 8S Trex 500 3026-1000KV, Jazz 55 10 32, Sportbec, 3 9650mg's, Vistabi V Bar V4 / JR8900. 8S Trex 600esp 4025-890KV, Jazz 55 10 32 with heatsink, Herc HC/HV bec, 3 JR8915's, Vistabi V Bar V4 / JR8900.

07-30-2013, 08:32 PM	#2 (permalink)
aaron07 Registered Users Thread Starter My HF Map location Join Date: Feb 2007 Location: Sydney City, Australia	Well after no response, I'll post my own experience in the near future for those interested, if any... __________________ 8S Trex 500 3026-1000KV, Jazz 55 10 32, Sportbec, 3 9650mg's, Vistabi V Bar V4 / JR8900. 8S Trex 600esp 4025-890KV, Jazz 55 10 32 with heatsink, Herc HC/HV bec, 3 JR8915's, Vistabi V Bar V4 / JR8900.

08-01-2013, 12:17 AM	#3 (permalink)
300c Registered Users Join Date: Oct 2009 Location: Scottsdale,AZ	Conv. I know a guy named chad who is in the middle of this conversion the biggest problem is converting or getting the layout right using a distribution board with Dji 30 a esc's

08-03-2013, 12:55 AM	#4 (permalink)
300c Registered Users Join Date: Oct 2009 Location: Scottsdale,AZ	Test flt We did a test flt today and it flies way better than the microkopter and GPS lock was within 6 inches. We very happy with the Wookong system

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode