Register Now

toxic-trip · 01-09-2007, 03:53 PM

i just blew out one of my batteries for the t-rex 450sa. i was using an

Align 2100mAh 3S
Output:11.1V(3S1P)2100mAh
Rating:16C (33A) continuous,20C burst (42A)

would this charger work for it? 2-3 Cell DC Li-Po Balancing Charger and AC Adapter, it is the one that comes with the blade cx2. it had 3 cell balance capabilitie and the output is 0.65A. if this would work how long would it take to charge on a 12v battery? and a wall outlet?

toxic-trip · 01-09-2007, 04:33 PM

i was wondering if i could charge my align battery with this charger said above. the blade cx2 lipo batter 7.2v 700mah says if you over discharge it then it is still capable of being used can my big align battery do the sane?

Pinecone · 01-09-2007, 06:20 PM

As I understand it the Eflit charger in teh Blades is NOT a true balancing charger.

As for using a lipo after it has been over discharged, keep a close eye on it, charge it outside on a fire resistant surface, and if it puffs, it is shot.

halfcab1981 · 01-09-2007, 06:29 PM

Toxic-trip, As everyone said in your thread yesterday. Do not charge that Align battery that you puffed. Throw it out. It is done. Whatever the Blade battery says, you should not charge a battery that has puffed like that.

I think your charger will work, just don't charge that busted Align battery you have. Don't even be tempted. I would think that the intensity of the response to you thread yesterday would be enough to convince you that you should not charge that battery.

01-09-2007, 03:53 PM	#1 (permalink)
toxic-trip Registered Users My HF Map location Join Date: Dec 2006	balance lipo charger? i just blew out one of my batteries for the t-rex 450sa. i was using an Align 2100mAh 3S Output:11.1V(3S1P)2100mAh Rating:16C (33A) continuous,20C burst (42A) would this charger work for it? 2-3 Cell DC Li-Po Balancing Charger and AC Adapter, it is the one that comes with the blade cx2. it had 3 cell balance capabilitie and the output is 0.65A. if this would work how long would it take to charge on a 12v battery? and a wall outlet?

01-09-2007, 06:20 PM	#3 (permalink)
Pinecone Registered Users Join Date: Sep 2006	As I understand it the Eflit charger in teh Blades is NOT a true balancing charger. As for using a lipo after it has been over discharged, keep a close eye on it, charge it outside on a fire resistant surface, and if it puffs, it is shot. __________________ Terry AMA#47402, IRCHA # 3395 Blade CP "Pro", Trex 450SE, PiccoZ, Quick of Japan EP8v2 EX, Hurricane 550, Hurricane 200, JR Vibe 50, Blade mCX, Bergen Intrepid Gasser, Pantera 50, Blade mSR, Novus CP

01-09-2007, 06:29 PM	#4 (permalink)
halfcab1981 Registered Users Join Date: Jul 2006	Toxic-trip, As everyone said in your thread yesterday. Do not charge that Align battery that you puffed. Throw it out. It is done. Whatever the Blade battery says, you should not charge a battery that has puffed like that. I think your charger will work, just don't charge that busted Align battery you have. Don't even be tempted. I would think that the intensity of the response to you thread yesterday would be enough to convince you that you should not charge that battery. __________________ ----------------------------------------------------- Kent "Never trust a man who, when left alone in a room with a tea cosy, doesn't try it on." - Billy Connolly

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-09-2007, 04:33 PM	#2 (permalink)
toxic-trip Registered Users Thread Starter My HF Map location Join Date: Dec 2006	i was wondering if i could charge my align battery with this charger said above. the blade cx2 lipo batter 7.2v 700mah says if you over discharge it then it is still capable of being used can my big align battery do the sane?

Register Now

Log-in