START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
Other Makes and Models Helicopters Other makes and model Helicopters |
|
LinkBack | Thread Tools | Display Modes |
01-24-2014, 09:30 PM | #1 (permalink) |
Registered Users
Join Date: May 2006
|
Help needed: Nine Eagles Solo Pro 319 (Blackhawk)
Hello,
I got this heli and it came with a "General Link" Module (NE-480133). I was able to hook it to my DX8 but I am having some issues. During the first flight, the heli had a very strong tendency to go all over the place during lift off, once in the air, I needed to keep "up" elevator and "left" aileron to keep the heli in an stable hoover. I disconnected the motor, moved the throttle above middle stick and leveled the swashplate. Take-off was more stable, but during hoover the heli still has a tendency to go forward and towards the right. I double checked the swashplate and it seems ok. I tried using the trims, but it didn't help. What else can I do? Also, I have a RTF Heli-Max Blackhawk that came with a TX610 Tx and I am trying to bind it to the SP319. The receiver on the SP319 (NE480140) doesn't have a "link" button so I am assuming is like the RedBull Rx, the problem is that the Tx610 doesn't enter the binding mode S-H when I pull the Trainer switch and turn on the radio (as listed in the J6 Pro manual, I am assuming the TX is a rebranded J6P) . I checked CG and the heli is level in X and Y.I tried contacting Nine Eagles, but they haven't responded. I bought the heli at nineeagleshop.com and they just said they are sorry that the unit is not working, and to find help somewhere else. Any help will be very much appreciated, CB Last edited by CrazyBear; 01-26-2014 at 02:07 AM.. |
Sponsored Links | |||
Advertisement |
|
Thread Tools | |
Display Modes | |
|
|