Rave 90 Custom Electro Conversion - HeliFreak
Fun, Learning, Friendship and Mutual Respect START  HERE


Unregistered
Go Back   HeliFreak > R/C Helicopter Support > 700 Class Nitro Helicopters > 700 Electric Conversions


700 Electric Conversions Align T-REX 700 Electric Conversions


Reply
 
Thread Tools Display Modes
Old 11-19-2012, 05:04 AM   #1
flyingchris1987
Registered Users
 

Join Date: Nov 2012
Location: Germany, Rostock
Smile Rave 90 Custom Electro Conversion

Hello,

I'm from Germany and I did an Electro Conversion of the Rave 90 ENV.

The main frame of the Custom Conversion is subdivided in an upper and lower frame. This is really good for crashing, 'cause usually just the lower frames tend to brake. They are connected through three hex spacer. Two of them are used for the battery tray. Really easy construction.

The chassis is very stiff. Stiffer than the original one. By using this conversion you save 24 srews and 160 gramms which is much.

You can set the clearance between the tooth tail drive gear and the tail boom assembly.

The battery tray is approximately 10 mm higher. This increases the roll rate and the overall performance of the Rave is better than before.

I hope that my english is not so bad.















flyingchris1987 is offline        Reply With Quote
Old 05-02-2013, 12:57 PM   #2
seemore74
Registered Users
 
Posts: 1,263
 

Join Date: Dec 2008
Location: london
Default

VERY IMPRESSIVE CONVERSION, WELL DONE
__________________
Shape 9.0, Trex 700 DFC pro** MKS Cyclics & Rudder Servos all round. Kontronik Pyro 750 Drives, Kontronik ESCs
Futaba SBus Rx, Futaba 8FG** transmission
.
seemore74 is offline        Reply With Quote
Old 05-06-2013, 05:56 AM   #3
flyingchris1987
Registered Users
Thread Starter Thread Starter
 

Join Date: Nov 2012
Location: Germany, Rostock
Default

Thanks.

Rave flies outstanding.
flyingchris1987 is offline        Reply With Quote
Old 05-25-2013, 04:46 AM   #4
flyingchris1987
Registered Users
Thread Starter Thread Starter
 

Join Date: Nov 2012
Location: Germany, Rostock
Default Update

Updates: We replaced the lower 2.0 mm frames through 1.5 mm frames.

Saved weight (Sum): 200 g

flyingchris1987 is offline        Reply With Quote
Reply




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Copyright © 2004-2016 by RCGroups.com, LLC except where otherwise indicated. The HeliFreak.com logo is a trademark of RCGroups.com, LLC.