Helix blades advice - HeliFreak
Fun, Learning, Friendship and Mutual Respect START  HERE

Go Back   HeliFreak > R/C Helicopters > Rotor Blades

Rotor Blades R/C Helicopter Rotor Blade Discussions

LinkBack Thread Tools Display Modes
Old 07-28-2016, 12:04 PM   #1 (permalink)
Registered Users

Join Date: May 2015
Location: Northern Ireland
Default Helix blades advice

Hi guys,

I've bought a set of used Helix blades, i put them straight onto my trex 700e that was flying perfect, but noticed the tracking was off. I put a pitch gauge on and noticed 1 blades was at a perfect 0 degrees and the other was at -1.

I adjusted the link to get it set perfect, but the heli fly's horrible. Any small input on the cyclic or pitch causes very bad bobbles. I tried lowering the head gain a lot but there is no change.

I have noticed that if i switch from one blade to the other in the same blade grip on the heli i get 2 completely different number. One blade reads 0 degrees mid stick and the other reads -0.8. I checked my aligns to see what they where reading but i was getting 0 degrees to 0.2 so they are really close.

Has anyone else experienced anything like this? Is this maybe a bad set? Seems to me like its maybe not a matching pair of blades as i would expect the numbers to be very close on the same blade grip. Any advice would be great!
CromedCm is offline        Reply With Quote
Sponsored Links

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Copyright © VerticalScope Inc. All rights reserved.

SEO by vBSEO 3.6.1