Lacquer...why not? - HeliFreak
Fun, Learning, Friendship and Mutual Respect START  HERE


Unregistered
Go Back   HeliFreak > R/C Helicopters > Painting and Airbrushing Tips / Techniques


Painting and Airbrushing Tips / Techniques Painting and Airbrushing Tips / Techniques


Reply
 
LinkBack Thread Tools Display Modes
Old 08-17-2016, 09:41 AM   #1 (permalink)
TT
Registered Users
 

Join Date: Nov 2006
Location: Kansas City, MO / Nakhonsawan Thailand
Default Lacquer...why not?

I have noticed that most of the painters on here are using a base coat/clear coat system, typically urethane. I have used PPG urethanes on large RC airplane fiberglass and carbon fiber parts with excellent results. I do not doubt the superiority of these paint systems for heli canopies but GAWD is that stuff expensive!!! Another drawback is that it needs to be custom mixed at an auto paint store or ordered online.

I’ve got several canopies and tail booms that I’m going to be painting soon in good ‘ol Lacquer. I did a couple of test pieces (Goblin 500 booms) in fluorescent rattle-can lacquer with rattle-can lacquer clear coat and was satisfied with the results. The paint is CHEAP and you can get it almost anywhere. I’m sure I can achieve better results using my mini HVLP gun (0.8mm tip) to shoot the primer and base coats, airbrushing the fancy stuff, then using the HVLP gun for the clear lacquer.

I can get clear automotive lacquer here for around $5 per quart. I am also going to try mixing up my own paint using raw pigment powder. The pigments are extremely cheap and can be mixed with clear lacquer. Has anyone else tried this?

Given the limited lifespan of 3D heli parts I just can’t see spending $100+ on paint for a couple of canopies.

Feedback (positive or negative) appreciated!

Last edited by TT; 08-18-2016 at 10:39 AM..
TT is offline        Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 08-21-2016, 03:48 PM   #2 (permalink)
Registered Users
 
Posts: 888
 

Join Date: Aug 2012
Location: Florida, USA
Default

Lacquer will give off fine line cracks all over the canopy.
__________________
I didn't crash. I just ran out of airspeed, altitude, and idea's all at the same time.
cobieg is offline        Reply With Quote Quick reply to this message
Old 09-06-2016, 10:57 PM   #3 (permalink)
Registered Users
 
Posts: 41
 
My HF Map location
Join Date: May 2007
Location: Buckley Wa.
Default

Lacquer is brittle. It wont take the flexing of the canopys. Automovitive paint today have a more flexible formula. Base/clear coat systems also dry much faster so you can do multi color much faster.
Lacquer will with time crack from srinkage, also to get a shine you had to cut and buff then clear and cut and buff to get a shine. Also the paint today resist nitro much. Lacquer will melt if nitro gets on it.
__________________
T-Rex 450 SE Clone 430XL GY401
artimus is offline        Reply With Quote Quick reply to this message
Reply




Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Location
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




Copyright © Website Acquisitions Inc. All rights reserved.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
 

SEO by vBSEO 3.6.1