Sealer or no sealer using HOK? - HeliFreak
Fun, Learning, Friendship and Mutual Respect START  HERE


Unregistered
Go Back   HeliFreak > R/C Helicopters > Painting and Airbrushing Tips / Techniques


Painting and Airbrushing Tips / Techniques Painting and Airbrushing Tips / Techniques


Reply
 
Thread Tools Display Modes
Old 08-26-2016, 06:53 AM   #1
Mach2Customs
Registered Users
 

Join Date: Aug 2016
Location: Houston TX
Default Sealer or no sealer using HOK?

I use pretty much HOK exclusively and have always had a question on sealers. Per their tech sheets they state that a sealer is a must for uniform coverage and more importantly to me better adhesion. Problem is that with spraying such small items I find that I work hard to get my primer nice and flat and sand it back to 600 grit then apply the sealer ,kd3000 mixed in a 4:1:2 ratio, apply it and have to always sand out a couple dust nibs or the like.

How many of you guys use a sealer between your primer and basecoat?
Mach2Customs is offline        Reply With Quote
Old 09-06-2016, 10:06 PM   #2
artimus
Registered Users
 
Posts: 41
 
My HF Map location
Join Date: May 2007
Location: Buckley Wa.
Default

HOK doesnt like other paint systems,they dont mix well, it hot and it will react by wrinkling the paint. Sealer will make sure that there's a barrier between their paint and for adheision for the topcoat.
__________________
T-Rex 450 SE Clone 430XL GY401
artimus is offline        Reply With Quote
Old 12-28-2016, 09:18 AM   #3
slickporsche
Registered Users
 

Join Date: Aug 2010
Location: american/philippines
Default

Sealer is always a must do if you want a quality finish. With it, you will get good color hold out, much better adhesion, and truer colors. Also 600 wet or dry is too fine for sanding primer. Better to use 400 wet or dry for better adhesion of paint. I would use 600 to knock down any nibs after sealing. I don't like to mix paint brands, but House of Kolor, and PPG, are compatible.
slickporsche is offline        Reply With Quote
Old 03-27-2017, 08:14 AM   #4
Kustom
Registered Users
 
Posts: 821
 
My HF Map location
Join Date: Dec 2008
Location: montgomery new york
Default

the new sealer line by HOK you can tint them so you will use less paint cause most people should be able to paint a cano with one once of paint if you use a sealer. check out coast airbrush and look at the new hok line they also have sealer color cards so you can find a sealer that works best for you . and if you don't have a compressor and large set up you can not get the paints in a rattle can so there is another option for some people.
__________________
Kustom
2 trex 450's Donated for a good cause
Bergen gasser build thread
Kustom is offline        Reply With Quote
Reply




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Copyright © 2004-2016 by RCGroups.com, LLC except where otherwise indicated. The HeliFreak.com logo is a trademark of RCGroups.com, LLC.