START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
bavarianDEMON/HeliCommand Factory Sponsored Bavarian DEMON and HeliCommand Support |
|
LinkBack | Thread Tools | Display Modes |
04-05-2017, 01:27 AM | #1 (permalink) |
Registered Users
Join Date: Dec 2011
|
Pitch changes after set up.
Hey guys, I set up my bd3sx and everything seems to be working fine. Except once done set up and restarting my heli the pitch changes. From 12 degrees each way to 11 and 13. Is this normal? Or do I need to restart set up again. Thanks in advance
Sent from my SM-G930W8 using Tapatalk |
Sponsored Links | |||
Advertisement |
|
04-05-2017, 02:56 AM | #2 (permalink) | |
Registered Users
Join Date: Nov 2016
|
Quote:
Linear pitch curve, no DR and no trims in? Seems like the centre value is changing with you gaining a degree one way and loosing it the other! Is it still zero pitch at centre stick? |
|
04-05-2017, 03:05 AM | #3 (permalink) |
Registered Users
Join Date: Dec 2010
|
Same thing I assume: in the Diagnose, real centers are sent to the servos. But if the collective stick does not do the same at center position, then of course there will be a difference afterwards.
So check that you do not get a swash movement at stick center when switching from Diagnose to Mixer page (do this as precise as possible). That should solve the problem.
__________________
Joachim CAPTRON Electronic GmbH - bavarianDEMON Support, Product & Sales Manager - |
04-05-2017, 03:33 AM | #4 (permalink) | |
Registered Users
Thread Starter
Join Date: Dec 2011
|
Quote:
Sent from my SM-G930W8 using Tapatalk |
|
04-05-2017, 03:34 AM | #5 (permalink) | |
Registered Users
Thread Starter
Join Date: Dec 2011
|
Quote:
Sent from my SM-G930W8 using Tapatalk |
|
Thread Tools | |
Display Modes | |
|
|