START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
120 SR Blade (eFlite) 120 SR Helicopters Information and Help |
|
LinkBack | Thread Tools | Display Modes |
08-20-2016, 01:19 PM | #1 (permalink) |
Registered Users
Join Date: Aug 2016
|
Spools up but no lift
I'm having issues getting this heli off the ground. I can spool the motor up to half stick, and then push all the way to full throttle but it won't give me any lift. I hold the throttle off and move the stick and the blades seem to angle to where I should be getting lift. The swash plate works to tilt the head in all four directions, just no lift... Any ideas what's going on?
|
Sponsored Links | |||
Advertisement |
|
08-20-2016, 02:44 PM | #2 (permalink) |
Registered Users
Join Date: Jun 2016
|
What are you flying...
I bet it's a blade nano cps
__________________
Écureuil AS355n.50 600mm - Lynx 450xl ntm1700kv 350mm- KDS Chase 360mm Scorpion 1880kv SK720be/Ikon |
12-17-2016, 01:30 PM | #3 (permalink) |
Registered Users
Join Date: Feb 2009
|
Mine is now acting the same way. Since I bought it used, great condition though, I have bought two new batteries and a new tail motor. At first it did ok in the garage but quickly lost power, so I'm guessing it is now time for a new main motor, possibly the Xtreme upgrade. I'm already selling it, so if this does not work I am not buying a main board because its just not worth it. I will chalk it up as a loss.
__________________
ScottHeli |
Thread Tools | |
Display Modes | |
|
|