What ESC's currently help with telemetry ?

[zr1100]

I'm aware of Kontronik Telme, which I believe is a no-solder connection between ESC and Jeti receiver--(I use Axon FBL)
Any others at this time ?--ie. Scorpion ESC, or others, with no soldering ?
Thanks

[Puttputt maru]

Mezon is one but Kontronik is in a different league and price.

Tribunus is an other one and not as pricy as the K with great performance based on others feedback. Trying one soon

Do not forget too that now a lot of FBL offer telemetry too

[LubeMan1]

The Castle Creations Edge series also provide telemetry. Just not sure with Axon

[zr1100]

Thanks--will have to research Castle edge to see how it is set up--

[brw0513]

I realise you are not using a Spirit FBL controller, but their online manual lists a few ESCs that have telemetry capability:

http://manual.spirit-system.com/inde...=ESC_telemetry

[zr1100]

Thanks very much--didn't know about HobbyWing--using a few of them.
When Jeti arrives (waiting on ds24) I'll see if Axon has telemetry options like Spirit does--or try Spirit.

[jhamel]

I believe the only FBL units currently capable of extracting the telemetry parameters of compatible ESCs without a need of special telemetry modules are Spirit and Brain/iKon2. I do not believe Axon extracts ESC telemetry at this time.

[Dmaxison]

The J-Log S32 is a telemetry gateway that works like the Telme adapter however supports many brands of ESC's. As of right now you'd use one of these with a Hobbywing or Castle with Axon.

https://www.aeropanda.com/products/jlog-s32-jlog-3

[AlastairC]

As above. The J-Log S32 will read most ESC's and convert to Jeti telemetry. The Axon does not support telemetry in at this point but it does have the FBL settings on the Axon from your TX.

Note that if you want to adjust your Axon from the TX and have another telemetry sensor (like the S32) you will need a REX receiver as it has multiple extension ports.

I have Jlogs on all my heli's except for the R5 as this has a Scorpion Tribunus ESC that speaks Jeti directly(you just run a servo cable from the esc to the receiver with the +'ve line removed.