Register Now

Shogun71 · 02-21-2017, 01:47 PM

Any thing new? Maybe downsize the concept to utilize smaller motors on say a 700 sized heli?

1000 sized monster??

joelr · 02-22-2017, 05:25 AM

I'm looking forward to the three bladed head!

Velos Rotors · 02-22-2017, 05:12 PM

The VelosUAV is almost ready to hit the market. Not excactly a hobby product but it is a new product for Velos Rotors with a lot of new features and innovative solutions . Expect photos, videos and more information really soon.

Some general specs:
Ready to fly
More than one hour flight time
Fully autonomous flight
Fully redundant design

Raptorapture · 03-18-2017, 12:23 PM

Nice!

Care to share some of the redundancies? Looking forward to hearing more about this project.

Shogun71 · 05-17-2017, 04:45 PM

The more I look at the UAV I just really like the look!!!!!

I love the stealth appearance and stance!

Any chance we will be able to buy the kit without the guts inside or maybe just a simple setup?

A VIKING · 05-18-2017, 06:22 AM

Quote:

Originally Posted by Shogun71

The more I look at the UAV I just really like the look!!!!!

I love the stealth appearance and stance!

Any chance we will be able to buy the kit without the guts inside or maybe just a simple setup?

You and me both.

This would be my dream machine.
My RC flying world, and others as well, doesn't revolve around 3D flight. My world revolves around just going out and enjoying the beauty of flight with some smooth big air.

Can you imagine showing up at the flying field with this airframe.
Same questions asked..."how many batteries did you bring for that thing"...answer..."just one set".
Question..."so you are only going to put up just one flight"...answer..."yes".

As you take off the nitro guys are standing there and one of them says..."he'll be done in a couple minutes and we'll take over".

An hour latter you hear..."what the hell" from the nitro guys.

Then pack it up and go make some money with it.

Super long flight times from an electric...I'm all in.

Velos Rotors · 05-31-2017, 01:40 PM

Here are some more photos from the VelosUAV.
VelosUAV is available as an assembled, tested and ready to fly platform. The on-board hardware used is top of the line and many parts are custom made specifically for the VelosUAV, like the blades, the motors, the servo monitoring micro controller etc.
Having said that for now, we are able to provide the helicopter with out the flight controller in case the client would like to use his own flight controller - autopilot - ground control station.
The rest of the hardware is standard.
The skids are also adjustable according to the payload.
For more information you can take a look to our new web site:
www.velosuav.com

A VIKING · 05-31-2017, 06:39 PM

Just one awesome flying machine Aris!
Just beautiful.

OnTheSnap · 05-31-2017, 06:55 PM

Wow, really impressive website!! And a great read on heli vs multi/R

mb-1953 · 06-01-2017, 07:22 AM

Wish I had one!!!

Shogun71 · 06-02-2017, 05:40 PM

Alex, I want to see you smack the crap out of one of those with a massive camera and gimbal on it....

That would be awesome as it lets go and takes everything out in massive explosion....

Not really, Any way to convert a standard Velos to the same look/skids?

02-21-2017, 01:47 PM	#1 (permalink)
Shogun71 Registered Users My HF Map location Join Date: May 2012	Anything in the plans for 2017/2018? Any thing new? Maybe downsize the concept to utilize smaller motors on say a 700 sized heli? 1000 sized monster?? __________________ Jeti DS-16, Oxy 3, Goblin 380, 500, 630, and 700 competition, Airwolf 600 scale heli, Brain/Ikon 2, Spartan VX1e, Sk 720, YGE and Hobbywing.

02-22-2017, 05:25 AM	#2 (permalink)
joelr Registered Users Join Date: Apr 2013	I'm looking forward to the three bladed head! __________________ Team Gaui USA/Empire Hobby Gaui NX7 - Gaui X7 - Gaui R5 - Gaui X5 - Gaui X4II - Gaui NX4 - Gaui X3L - Gaui X3 - Gaui X2 - Velos 880 AMA 267329

02-22-2017, 05:12 PM	#3 (permalink)
Velos Rotors Registered Users Join Date: Apr 2015	The VelosUAV is almost ready to hit the market. Not excactly a hobby product but it is a new product for Velos Rotors with a lot of new features and innovative solutions . Expect photos, videos and more information really soon. Some general specs: Ready to fly More than one hour flight time Fully autonomous flight Fully redundant design Attached Thumbnails

03-18-2017, 12:23 PM	#4 (permalink)
Raptorapture CHC Benefactor Join Date: Feb 2006 Location: Singapore	Nice! Care to share some of the redundancies? Looking forward to hearing more about this project. __________________ Playing with gravity one heli at a time Dancing with gravity one flight at a time

05-17-2017, 04:45 PM	#5 (permalink)
Shogun71 Registered Users Thread Starter My HF Map location Join Date: May 2012	The more I look at the UAV I just really like the look!!!!! I love the stealth appearance and stance! Any chance we will be able to buy the kit without the guts inside or maybe just a simple setup? __________________ Jeti DS-16, Oxy 3, Goblin 380, 500, 630, and 700 competition, Airwolf 600 scale heli, Brain/Ikon 2, Spartan VX1e, Sk 720, YGE and Hobbywing.

05-31-2017, 01:40 PM	#7 (permalink)
Velos Rotors Registered Users Join Date: Apr 2015	Here are some more photos from the VelosUAV. VelosUAV is available as an assembled, tested and ready to fly platform. The on-board hardware used is top of the line and many parts are custom made specifically for the VelosUAV, like the blades, the motors, the servo monitoring micro controller etc. Having said that for now, we are able to provide the helicopter with out the flight controller in case the client would like to use his own flight controller - autopilot - ground control station. The rest of the hardware is standard. The skids are also adjustable according to the payload. For more information you can take a look to our new web site: www.velosuav.com Attached Thumbnails trillian likes this.

05-31-2017, 06:39 PM	#8 (permalink)
A VIKING Registered Users Join Date: Dec 2012	Just one awesome flying machine Aris! Just beautiful. __________________ Velos Rotors<<SAB<<Compas<<Align<<Walkera <<Propel

05-31-2017, 06:55 PM	#9 (permalink)
OnTheSnap Registered Users Join Date: Jan 2009 Location: NorCal	Wow, really impressive website!! And a great read on heli vs multi/R __________________ Xpert Scorpion Power Systems Helidirect

06-01-2017, 07:22 AM	#10 (permalink)
mb-1953 Registered Users Join Date: Jan 2014	Wish I had one!!!

06-02-2017, 05:40 PM	#11 (permalink)
Shogun71 Registered Users Thread Starter My HF Map location Join Date: May 2012	Alex, I want to see you smack the crap out of one of those with a massive camera and gimbal on it.... That would be awesome as it lets go and takes everything out in massive explosion.... Not really, Any way to convert a standard Velos to the same look/skids? __________________ Jeti DS-16, Oxy 3, Goblin 380, 500, 630, and 700 competition, Airwolf 600 scale heli, Brain/Ikon 2, Spartan VX1e, Sk 720, YGE and Hobbywing.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in