Trex 150x Initialization Problem

[jimmy77611]

I just received my 150x, but it won't initialize. I'm binding to spektrum DSMX with a satellite, and the LED is solid. The red and aqua lights are flashing back and forth and only 3 tones from the esc. My throttle endpoints are -100 and 100, and I've even tried -150 to 150 (the most I can go). I've also tried reversing the throttle channel.

I don't know why it thinks it's not at zero throttle or won't initialize. This is the same system that I've used for a couple of other helis, so I don't think it's my TX.

[lmcwilli]

I can't tell from your post what you're trying to initialize. Are you trying to initialize your ESC. I may have had a similar problem (finally solved). But your description is not detailed enough for me to tell.

[jimmy77611]

I'm trying to initialize the GRS unit on my new trex 150x helicopter, esc and flybarless system.

The only thing that happens is I get the satellite on with a solid light, tx indicates that it is communicating in dsmx, and three tones from the heli. The red and aqua lights then flash back and forth. No servo movement and no two tones indicating the esc is armed. When I link the heli up to the app, I'm seeing no movement on the radio sliders when I move the sticks either.

[helislope]

If you are still have an issue gives us Enterprise Hobby a call at 909-321-2717 to see if we can get you working.

Gale
Enterprise Hobby

Sent from my SM-N900P using Tapatalk