Going to order Oxy 3

[Wargamer]

Originally Posted by Tgilf

Really cautious just doing circles :-) could not stand this heli getting crashed

Patience is good. It takes a lot of practice to do smooth circles and eights. Sim time along with the heli time will help a lot.

[Tgilf]

Originally Posted by Mikej

Smash it in Once they have a few battle scars they fly a lot better

Haha
Guess you are right. But it's so beautiful.

I smash the k110 around as much as I can

[paulsreef]

Originally Posted by Tgilf

Yes!!! Sorry for not replying for so long.
Oxy 3 is flying so great. So much fun. Got a little tail wag but got it sorted out by lowering tail gain to 18 in msh brain. Got 4 flights until now.
Really cautious just doing circles :-) could not stand this heli getting crashed

I have the DX6 radio too, so when I order mine, hopefully you'll be an expert by then and can provide some tips? Enjoy the heli!

[Rahulgaba]

Originally Posted by Tgilf

So back to getting the oxy done.
Stuck at msh setup governor:
Ratio: 10.000 with eox 2214 and the 14t pinion correct?
Tail ratio: 4214
Sensor divisor: 5

Is this correct?

What do I choose for the head speed numbers 1. 2. And 3. ? What fits the beginner best?

Second question:
In the rescue tab in msh setup what do I have to chose here?

Third question:
In the second last tab (flight mode)
What are the best values for beginner, sport, 3D?

Fourth question:
Do I have to change throttle or pitch curves on the dx6?
Please help me really stuck here


Maybe I need to add that I assigned the 3 setups du channel 5 via this tutorial

https://www.helifreak.com/showthread.php?t=663539

Sensor divisor should be 3 not 5... isn't sensor divisor :: poles/2
If that's the case this 2214 lynx motor is 6 pole


Sent from my iPhone using Tapatalk

[Tgilf]

Thanks a lot. Did already change that but missed to add in the thread thanks again

Originally Posted by Rahulgaba

Sensor divisor should be 3 not 5... isn't sensor divisor :: poles/2
If that's the case this 2214 lynx motor is 6 pole


Sent from my iPhone using Tapatalk

[Rahulgaba]

Awesome good to hear!
Now let me ask you this ..
You are running msh brain governor right?
Are you running a hobbywing ESc?
I just acquired this oxy .. it has hobbywing and I use IKON with Hyperion feeding the rpm signals

Wondering what changes you made to your ESc settings (if you have hobbywing) .. to make it all work


Sent from my iPhone using Tapatalk

[Tgilf]

Yes! Everything right. I use the platinum 50a Hobbywing and just disabled the gov via stick programming and raised voltage to about 6v nothing else changed. Works pretty well for me

Originally Posted by Rahulgaba

Awesome good to hear!
Now let me ask you this ..
You are running msh brain governor right?
Are you running a hobbywing ESc?
I just acquired this oxy .. it has hobbywing and I use IKON with Hyperion feeding the rpm signals

Wondering what changes you made to your ESc settings (if you have hobbywing) .. to make it all work


Sent from my iPhone using Tapatalk

[Rahulgaba]

Good to know thanks


Sent from my iPhone using Tapatalk

[Tgilf]

Glad that I could help you.

Originally Posted by Rahulgaba

Good to know thanks


Sent from my iPhone using Tapatalk

[jrman83]

The HW50V3, which many use, doesn't have the challenges that the 40A came with.