Register Now

HeliBenj · 09-08-2010, 03:29 PM

So I took the plunge and bought a second hand Srimok from a fellow Swedish helifreaker, should be here by the end of this week / beginning of next, can't wait

Anyway, seller told me the heli has serial number SRIMOK 90 / 0114944000, bought 3 months ago, so just wondering if it's a 2010 kit. Can you guys check on your serials and tell me what you think?

Heli will finally have the following:
YS91 SR with Hatori pipe
Radix 690
Radix 105
VBlades paddles
DS610 on cyclics
DS620 on throttle
Quark / BLS254 on tail

First 90 for me, so I guess it's not too bad of a pick for a first one, I'm looking forward to receive it, I have read a lot and I think I know what to look for, but I might ask help for you Srimokers in the near future anyway

Breezyjr · 09-27-2010, 07:53 PM

The serial number I have on mine, which was purchased a year ago, is like 0000000340.

Something like that.... Yes, I was one of the first to buy them... at least the first 400 or so... lol

Joe_Breezy

HeliBenj · 09-28-2010, 07:41 AM

Mine turned out to be #338 so a brother of yours, a 2009 kit with 2010 upgrades. On mine I found two minor defects: Spincle too long (a bit of filing cured that) and autorotation sleeve out of tolerance (10.19 mm ID), Kasama is sending a replacement.

EDIT: Man I just saw your signature, now this is a fleet!

Mercuriell · 09-28-2010, 07:45 AM

My Srimok 90 is 0900174 - first into Australia

and over a year old now with 100+ flights

UH1H · 09-30-2010, 01:07 PM

Well..you guy get me puzzled here..there is no serial number on the heli but on the box I got this label : Srimok 90E Kit 2010 Ciber Rotor Head KSM2010490CE and the bar code. Purchased in Dubai at Ultimate Heli on September 4th...

This is the version with factory painted canopy & black canopy cover.

Ultimate Heli replaced a Titanium Frame Screw M4X34 because the socket head was not pressed into the head of the bolt. Everything else is Perfect. No part missing.

Status: Build...electronic partially installed..wiring job to do...should fly in a week or so.

Hope this help.

Stenis bling · 09-30-2010, 01:53 PM

I am not far away from you Mercuriell mine is 0900272 the first one in Sweden

The serial number can be found on the engine mount base plate.

Breezyjr · 09-30-2010, 02:22 PM

I don't think there's one listed for the 90E, we were referring to the nitro version.

Joe_Breezy

Breezyjr · 09-30-2010, 02:24 PM

Quote:

Originally Posted by HeliBenj

Mine turned out to be #338 so a brother of yours, a 2009 kit with 2010 upgrades. On mine I found two minor defects: Spincle too long (a bit of filing cured that) and autorotation sleeve out of tolerance (10.19 mm ID), Kasama is sending a replacement.

EDIT: Man I just saw your signature, now this is a fleet!

Mine wasn't missing any parts, that I know of....

But, it did have a bent main shaft..... very slight, only enough to cause wobbling when got to higher RPM. But, my new 90E has one the was obvious when I put it in, but I was hoping to be wrong... Nope, my eyes are still good enough.... <argh>

Joe_Breezy

Sage · 10-01-2010, 01:10 PM

Quote:

Originally Posted by Breezyjr

I don't think there's one listed for the 90E, we were referring to the nitro version.

Joe_Breezy

Hi Srimokers

Just got my Srimok 90E an our ago

What I can see serial number can be found on the sticker on the box only

Mine is KSM2010490E

I hope will be same problem free as my nitro version

Sage · 10-01-2010, 01:17 PM

Quote:

Originally Posted by UH1H

Well..you guy get me puzzled here..there is no serial number on the heli but on the box I got this label : Srimok 90E Kit 2010 Ciber Rotor Head KSM2010490CE and the bar code. Purchased in Dubai at Ultimate Heli on September 4th...

This is the version with factory painted canopy & black canopy cover.

Hi again

Hv noticed right now that we hv got brothers separated from each other

My is KSM2010490E fly bar head purchased from CompleteHeli 2 days ago

World is small. I'am in Miami, Fl right now.

UH1H · 10-03-2010, 03:20 AM

Quote:

Originally Posted by Sage

Hi again

Hv noticed right now that we hv got brothers separated from each other

My is KSM2010490E fly bar head purchased from CompleteHeli 2 days ago

World is small. I'am in Miami, Fl right now.

Interesting

They will be closer soon..

I am going back to Canada November First !

Maybe we should start a track log of all serial numbers ( N & E ) with location ! Be fun

Mercuriell · 10-03-2010, 03:44 AM

Quote:

Originally Posted by UH1H

Interesting

They will be closer soon..

I am going back to Canada November First !

Maybe we should start a track log of all serial numbers ( N & E ) with location ! Be fun

Sounds good !!! You guys supply the serials and I'll make a master post at the top of thread with the summary

Breezyjr · 10-03-2010, 10:08 AM

Darn it... I tossed my box before I checked the serial # on my 90E...

I have two Nitro's though I can use.....

Joe_Breezy

HeliBenj · 10-04-2010, 06:24 AM

Quote:

Originally Posted by UH1H

Well..you guy get me puzzled here..there is no serial number on the heli but on the box I got this label : Srimok 90E Kit 2010 Ciber Rotor Head KSM2010490CE and the bar code. Purchased in Dubai at Ultimate Heli on September 4th...

This is the version with factory painted canopy & black canopy cover.

Ultimate Heli replaced a Titanium Frame Screw M4X34 because the socket head was not pressed into the head of the bolt. Everything else is Perfect. No part missing.

Status: Build...electronic partially installed..wiring job to do...should fly in a week or so.

Hope this help.

The serial number we refer to on the nitros is the one on the main chassis / motor mount. Obviously the E doesn't have this mount, so maybe the only number is on the box?

UH1H · 10-04-2010, 08:56 AM

Short of taking apart my Faifa... I could not see any serial number anywhere except those numbers on the box label...

Maybe we should ask Kasama about the serial number sequences of the N & E ?

billiano · 10-11-2010, 03:29 AM

Mine is
Box S/N:2009590C
(2010 Model 2010 full upgrades cyberhead)
Heli S/N:0900379
(On the heli base)

And it was purchased from Esprit Models(Florida) February of 2010

Alekoy · 10-12-2010, 04:39 PM

Mine is a 09, with 2010 upgrades, serno. 0900107. Oldest/lowest one yet?

Breezyjr · 10-14-2010, 07:02 AM

I believe so.....

Did you buy this yourself? If so, you must of have been one of the first to order....

Joe_Breezy

Alekoy · 10-14-2010, 11:02 AM

No, I bought it "unused" as it was built and "flown" but not set up properly..

wikanes · 10-14-2010, 04:08 PM

Quote:

Originally Posted by Alekoy

No, I bought it "unused" as it was built and "flown" but not set up properly..

And still not set up properly as you/we are waiting for some custom parts.........

09-08-2010, 03:29 PM	#1 (permalink)
HeliBenj Registered Users Join Date: Jan 2009	Srimok 90 serial number So I took the plunge and bought a second hand Srimok from a fellow Swedish helifreaker, should be here by the end of this week / beginning of next, can't wait Anyway, seller told me the heli has serial number SRIMOK 90 / 0114944000, bought 3 months ago, so just wondering if it's a 2010 kit. Can you guys check on your serials and tell me what you think? Heli will finally have the following: YS91 SR with Hatori pipe Radix 690 Radix 105 VBlades paddles DS610 on cyclics DS620 on throttle Quark / BLS254 on tail First 90 for me, so I guess it's not too bad of a pick for a first one, I'm looking forward to receive it, I have read a lot and I think I know what to look for, but I might ask help for you Srimokers in the near future anyway __________________ Ben Goblin 500 IKON w/ gov, Quantum 4115-1200, Hitec 5245, BLS251 DX8, RF6

09-27-2010, 07:53 PM	#2 (permalink)
Breezyjr Registered Users My HF Map location Join Date: Apr 2009	The serial number I have on mine, which was purchased a year ago, is like 0000000340. Something like that.... Yes, I was one of the first to buy them... at least the first 400 or so... lol Joe_Breezy __________________ Diablo, Shape 9.0, Goblin 700 & 380, Sylphide 90, Srimok 90N x2, Srimok 90E, Dune, Vibe 90SG, TDR, E-Aurora, Logo 600SE & 500SE, T600 ESP, T600NSP, Synergy E6 & E5, Warp 360, Gaui NX4 & X4,T500, T450 Pro FBL, 180CFX and 130x

09-28-2010, 07:41 AM	#3 (permalink)
HeliBenj Registered Users Thread Starter Join Date: Jan 2009	Mine turned out to be #338 so a brother of yours, a 2009 kit with 2010 upgrades. On mine I found two minor defects: Spincle too long (a bit of filing cured that) and autorotation sleeve out of tolerance (10.19 mm ID), Kasama is sending a replacement. EDIT: Man I just saw your signature, now this is a fleet! __________________ Ben Goblin 500 IKON w/ gov, Quantum 4115-1200, Hitec 5245, BLS251 DX8, RF6

09-28-2010, 07:45 AM	#4 (permalink)
Mercuriell HF Support Join Date: Sep 2006	My Srimok 90 is 0900174 - first into Australia and over a year old now with 100+ flights __________________ John

09-30-2010, 02:22 PM	#7 (permalink)
Breezyjr Registered Users My HF Map location Join Date: Apr 2009	I don't think there's one listed for the 90E, we were referring to the nitro version. Joe_Breezy __________________ Diablo, Shape 9.0, Goblin 700 & 380, Sylphide 90, Srimok 90N x2, Srimok 90E, Dune, Vibe 90SG, TDR, E-Aurora, Logo 600SE & 500SE, T600 ESP, T600NSP, Synergy E6 & E5, Warp 360, Gaui NX4 & X4,T500, T450 Pro FBL, 180CFX and 130x

09-30-2010, 01:07 PM	#5 (permalink)
UH1H Registered Users Join Date: Apr 2010 Location: Canada	Well..you guy get me puzzled here..there is no serial number on the heli but on the box I got this label : Srimok 90E Kit 2010 Ciber Rotor Head KSM2010490CE and the bar code. Purchased in Dubai at Ultimate Heli on September 4th... This is the version with factory painted canopy & black canopy cover. Ultimate Heli replaced a Titanium Frame Screw M4X34 because the socket head was not pressed into the head of the bolt. Everything else is Perfect. No part missing. Status: Build...electronic partially installed..wiring job to do...should fly in a week or so. Hope this help.

09-30-2010, 01:53 PM	#6 (permalink)
Stenis bling Registered Users Join Date: Dec 2007	I am not far away from you Mercuriell mine is 0900272 the first one in Sweden The serial number can be found on the engine mount base plate.

10-03-2010, 10:08 AM	#13 (permalink)
Breezyjr Registered Users My HF Map location Join Date: Apr 2009	Darn it... I tossed my box before I checked the serial # on my 90E... I have two Nitro's though I can use..... Joe_Breezy __________________ Diablo, Shape 9.0, Goblin 700 & 380, Sylphide 90, Srimok 90N x2, Srimok 90E, Dune, Vibe 90SG, TDR, E-Aurora, Logo 600SE & 500SE, T600 ESP, T600NSP, Synergy E6 & E5, Warp 360, Gaui NX4 & X4,T500, T450 Pro FBL, 180CFX and 130x

10-04-2010, 08:56 AM	#15 (permalink)
UH1H Registered Users Join Date: Apr 2010 Location: Canada	Short of taking apart my Faifa... I could not see any serial number anywhere except those numbers on the box label... Maybe we should ask Kasama about the serial number sequences of the N & E ?

10-11-2010, 03:29 AM	#16 (permalink)
billiano Registered Users My HF Map location Join Date: Dec 2007	Mine is Box S/N:2009590C (2010 Model 2010 full upgrades cyberhead) Heli S/N:0900379 (On the heli base) And it was purchased from Esprit Models(Florida) February of 2010 __________________ Bill Esprit Model Flying, TDR Rigid x2 F9 Fiberglass Europe Canopies

10-12-2010, 04:39 PM	#17 (permalink)
Alekoy Registered Users My HF Map location Join Date: Nov 2009	Mine is a 09, with 2010 upgrades, serno. 0900107. Oldest/lowest one yet? __________________ Helibug Mercury 800, Henseleit TD-NT, Henseleit TDR, Tarot FY680, XuGong-10, TBS Disco PRO, Blackout Miniquad, Futaba 14SG, EZuhf.

10-14-2010, 07:02 AM	#18 (permalink)
Breezyjr Registered Users My HF Map location Join Date: Apr 2009	I believe so..... Did you buy this yourself? If so, you must of have been one of the first to order.... Joe_Breezy __________________ Diablo, Shape 9.0, Goblin 700 & 380, Sylphide 90, Srimok 90N x2, Srimok 90E, Dune, Vibe 90SG, TDR, E-Aurora, Logo 600SE & 500SE, T600 ESP, T600NSP, Synergy E6 & E5, Warp 360, Gaui NX4 & X4,T500, T450 Pro FBL, 180CFX and 130x

10-14-2010, 11:02 AM	#19 (permalink)
Alekoy Registered Users My HF Map location Join Date: Nov 2009	No, I bought it "unused" as it was built and "flown" but not set up properly.. __________________ Helibug Mercury 800, Henseleit TD-NT, Henseleit TDR, Tarot FY680, XuGong-10, TBS Disco PRO, Blackout Miniquad, Futaba 14SG, EZuhf.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in