Register Now

hoggy · 10-11-2016, 07:24 PM

Hey guys
Can the mini protos stretch sqing 360mm blades?
Any issues with them touching the tail blades?

learnedthehardway · 10-11-2016, 08:27 PM

Put some Switch 60mm cf tail blades on and have used Zeal energy 360mm and RJX energy 360mm with no issues.

Bought my Mini used and it had some rather long Lynx plastic tail blades on so I got the 60mm for more clearance. Not sure what length the stock tail blades are or if they'll clear 360's or not.

Just have to be careful since some mains are 360mm total and others are 360mm from the bolt hole.

FNFAL · 03-26-2017, 11:27 AM

FYI

Stock Mini Protos tail blade length ~56mm

FNFAL · 07-14-2017, 04:10 PM

Any general comments regarding going up to 360mm blades on the stretch over the stock 350mm mains?

Affects on;

Performance?
Motor/esc temps?
Flight time?

My setup is stock 6S motor, 15T pinion, Talon 35.

learnedthehardway · 07-17-2017, 05:27 AM

Not much. It's a very small change.
I like Switch 353mm, best balance of stability and agility IMO.

10-11-2016, 07:24 PM	#1 (permalink)
hoggy Registered Users Join Date: Sep 2011	Mini protos on 360mm Hey guys Can the mini protos stretch sqing 360mm blades? Any issues with them touching the tail blades?

10-11-2016, 08:27 PM	#2 (permalink)
learnedthehardway Registered Users Join Date: Feb 2015	Put some Switch 60mm cf tail blades on and have used Zeal energy 360mm and RJX energy 360mm with no issues. Bought my Mini used and it had some rather long Lynx plastic tail blades on so I got the 60mm for more clearance. Not sure what length the stock tail blades are or if they'll clear 360's or not. Just have to be careful since some mains are 360mm total and others are 360mm from the bolt hole. __________________ Mini Protos 6s stretch/XK K110/Trex 450sport v2 fbl/Rochobby Nemesis NXT/RareBear funfighter620mm ~Problem Child~

03-26-2017, 11:27 AM	#3 (permalink)
FNFAL Registered Users Join Date: Oct 2012 Location: Dayton Ohio	FYI Stock Mini Protos tail blade length ~56mm Last edited by FNFAL; 03-26-2017 at 11:40 AM..

07-17-2017, 05:27 AM	#5 (permalink)
learnedthehardway Registered Users Join Date: Feb 2015	Not much. It's a very small change. I like Switch 353mm, best balance of stability and agility IMO. __________________ Mini Protos 6s stretch/XK K110/Trex 450sport v2 fbl/Rochobby Nemesis NXT/RareBear funfighter620mm ~Problem Child~

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-14-2017, 04:10 PM	#4 (permalink)
FNFAL Registered Users Join Date: Oct 2012 Location: Dayton Ohio	Any general comments regarding going up to 360mm blades on the stretch over the stock 350mm mains? Affects on; Performance? Motor/esc temps? Flight time? My setup is stock 6S motor, 15T pinion, Talon 35.

Register Now

Log-in