Register Now

gunny_jeeves · 03-14-2016, 04:44 PM

I have this major issue with the NAZA M lite...

The quad is super super slow to climb in ATTI or GPS mode. (I mean like 1 foot every 15 seconds... Ridiculously slow) and it takes nearly 80% throttle to hold it in a hover.

That said, turn it to manual... Its crazy fast. Actually really capable.

What if anything might I try to have it gain altitude more normally? (Like say 1-2 feet per second?) I'm not expecting it to punchout to the Gods, but to raise a foot or two if I spike the throttle 100% for three seconds.. I'd expect to be ideally 6 or 10 feet higher than I was before the spike.

I'm willing to change just about anything. Any ideas welcome.

04fxdwgi · 03-15-2016, 03:12 AM

Hey Gunny,

Is it a stock Naza Lite or has it been re-flashed to V2?

Sorry, but if it's stock, I don't know how to help, as I've always re-flashed, so I have no experience w/ the Lite software, but it almost sounds like it's hitting the first low voltage warning and limiting power output. What are your voltage warnings set at and are you using 3 or 4S batteries? Any LED notifications / warnings from the LED light?

PS: Reflashing is a worth while step. Gives the Lite all the bells and whistles of a V2 and the enhanced V2 software.

gunny_jeeves · 03-15-2016, 01:05 PM

Quote:

Originally Posted by 04fxdwgi

Hey Gunny,

Is it a stock Naza Lite or has it been re-flashed to V2?

Sorry, but if it's stock, I don't know how to help, as I've always re-flashed, so I have no experience w/ the Lite software, but it almost sounds like it's hitting the first low voltage warning and limiting power output. What are your voltage warnings set at and are you using 3 or 4S batteries? Any LED notifications / warnings from the LED light?

PS: Reflashing is a worth while step. Gives the Lite all the bells and whistles of a V2 and the enhanced V2 software.

AWESOME! Will look into it... (Yeah no options.)

Hmmm so this is a hack... It's likely to work now, but the lite will likely break and revert or lock itself in the future. (Worked perfect with v4.02.. Now surprise! 4.04 detects a lite serial and klobbers it!)

04fxdwgi · 03-16-2016, 03:35 AM

Thanx for the feedback. Certainly won't be "upgrading" to V4.04 now that this has been disclosed.

03-14-2016, 04:44 PM	#1 (permalink)
gunny_jeeves Registered Users Join Date: Mar 2013	Hail Mary Pass - So the NAZA M is SLOW! I have this major issue with the NAZA M lite... The quad is super super slow to climb in ATTI or GPS mode. (I mean like 1 foot every 15 seconds... Ridiculously slow) and it takes nearly 80% throttle to hold it in a hover. That said, turn it to manual... Its crazy fast. Actually really capable. What if anything might I try to have it gain altitude more normally? (Like say 1-2 feet per second?) I'm not expecting it to punchout to the Gods, but to raise a foot or two if I spike the throttle 100% for three seconds.. I'd expect to be ideally 6 or 10 feet higher than I was before the spike. I'm willing to change just about anything. Any ideas welcome.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-15-2016, 03:12 AM	#2 (permalink)
04fxdwgi Registered Users Join Date: Sep 2014 Location: Eastern North Carolina	Hey Gunny, Is it a stock Naza Lite or has it been re-flashed to V2? Sorry, but if it's stock, I don't know how to help, as I've always re-flashed, so I have no experience w/ the Lite software, but it almost sounds like it's hitting the first low voltage warning and limiting power output. What are your voltage warnings set at and are you using 3 or 4S batteries? Any LED notifications / warnings from the LED light? PS: Reflashing is a worth while step. Gives the Lite all the bells and whistles of a V2 and the enhanced V2 software.

03-16-2016, 03:35 AM	#4 (permalink)
04fxdwgi Registered Users Join Date: Sep 2014 Location: Eastern North Carolina	Thanx for the feedback. Certainly won't be "upgrading" to V4.04 now that this has been disclosed.

Register Now

Log-in