Register Now

Kingacp · 01-15-2015, 10:01 PM

Well after loosing my First Disco, I finally got all the parts to Build a Disco Pro, I set it up with the Vector Controller, From the first power up the Gimbal Shakes like a made dog, and won't even try to stabilize out, spent two days trying to figure it out

, no matter what I do with the settings, it doesn't work. I also have problems getting the Vector setup,

Just about ready to throw the towel in and go back to the Naza and the Tarot Gimbal no problems with that setup on my Old Disco.

Big Island Guy · 01-15-2015, 11:31 PM

Sorry for your woes man. Have you tried using the gimbal calibration button? Also, what is controlling the gimbal's roll and pitch. What you describe sounds like what happens when there's no signal to either.

petedee · 01-17-2015, 01:24 PM

Have you gone into the gimbal software and had a look at the settings?

01-15-2015, 10:01 PM	#1 (permalink)
Kingacp Registered Users My HF Map location Join Date: Mar 2012	Disco Pro Gimbal Problem Well after loosing my First Disco, I finally got all the parts to Build a Disco Pro, I set it up with the Vector Controller, From the first power up the Gimbal Shakes like a made dog, and won't even try to stabilize out, spent two days trying to figure it out, no matter what I do with the settings, it doesn't work. I also have problems getting the Vector setup, Just about ready to throw the towel in and go back to the Naza and the Tarot Gimbal no problems with that setup on my Old Disco. __________________ MCP X v1, MCP X 2, Nano cpx, 130 X, (2)-120SR, Razor 450, (TBS Discovery - Naza v2 - T-Motor 3510 - 630 kv - Go-Pro Black Edition - Pro700 700 tvl WDR CCD), DX6i, DX8, DX18

01-15-2015, 11:31 PM	#2 (permalink)
Big Island Guy HF MR Support Join Date: Nov 2012	Sorry for your woes man. Have you tried using the gimbal calibration button? Also, what is controlling the gimbal's roll and pitch. What you describe sounds like what happens when there's no signal to either. __________________ 3 years cancer free! Woot!! ~ Cancer can kiss my grits! Ainokea! If you never crash, you're not having enough fun! Pilot, Team Lavaquad

01-17-2015, 01:24 PM	#3 (permalink)
petedee Registered Users Join Date: Sep 2011	Have you gone into the gimbal software and had a look at the settings? __________________ similis vobis fugere eam furatus "The beatings will continue until morale improves." -- William Bligh

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in