START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
MSH Brain FBL Unit MSH Brain Support Forum |
|
LinkBack | Thread Tools | Display Modes |
04-23-2017, 06:35 PM | #1 (permalink) |
Registered Users
Join Date: Oct 2011
|
bank switching question
So im going to setup my oxy2 tomorrow with my new micro ikon2. ive watched videos and read the heck out of these forums but the one thing im not getting....on my dx8 i use the flight mode switch (B) to change from norm, to idle 1 to idle 2. now correct me if im wrong but now to change between flight modes i need to setup different banks within the software for my different modes? So i need to set a switch (maybe switch B) to change between my flight modes?
this is my first ikon fbl so im not familar with the setup at all so i appreciate any help with this. oh and for the guy thats gonna say all i needed to do is "do a search", i have and didnt come up with anything to keep me from asking this....
__________________
UH-60 EXI 500 DFC/3GX v5.0 ICE 75 Bec Pro w/4 blade main & tail rotors Align trex 500DFC Pro w/AR7210bx Oxy 2 FE micro Ikon2 Talon 25 BA 8-1 servos Oxy 3 Tareq Edition AR7210bx Edge lite 50 Kst 215's PL6 w/Bump Controller-24v PS DX8 gen2 |
Sponsored Links | |||
Advertisement |
|
04-23-2017, 06:58 PM | #2 (permalink) |
Registered Users
Join Date: Nov 2015
Location: Kansas
|
In transmitter setup, panel 5. Down at the bottom you should see, (current setup) bar. This is where you setup a switch on the Tx for your banks or different flight modes. I used switch F on my DX8g2, 3 positions.
Then go to panel 13 and you will see 3 setups. Operate the switch on TX that you setup in panel 5 for (current setup) and it should switch from 1,2 and 3 setups, high lighting the current setup you are in (green). Hope this helps you out Also the fbl should blink red led that corresponds with what setup you are in. 1blink for setup 1, 2 blinks setup 2.......
__________________
Align450L Dominator Align 550X SAB570(R.I.P.) Kraken 700 BT T Line DX6i/DX8G2/NX10 Last edited by Leadzeplin; 04-23-2017 at 07:27 PM.. |
04-24-2017, 08:12 PM | #3 (permalink) |
Registered Users
Thread Starter
Join Date: Oct 2011
|
oh i forgot about posting this..... sorry and thanks. i got it all sorted out and am happy enough with the ikon2 setup to hopefully maiden my oxy2 tomorrow. its supposed to be windy but we will see.
the ikon(2) setup is straight forword once you do it and run through the tabs a few times but without any very good how to videos except the videos for the original ikon some things just dont click at first.
__________________
UH-60 EXI 500 DFC/3GX v5.0 ICE 75 Bec Pro w/4 blade main & tail rotors Align trex 500DFC Pro w/AR7210bx Oxy 2 FE micro Ikon2 Talon 25 BA 8-1 servos Oxy 3 Tareq Edition AR7210bx Edge lite 50 Kst 215's PL6 w/Bump Controller-24v PS DX8 gen2 |
Thread Tools | |
Display Modes | |
|
|