KKII 80 amp data log esc

[deebee]

Looking for info from anyone who has experience with this esc, reliability, accuracy of data, operating temps, etc.
I got this to run a Scorp 3026 880kv on a Protos 500, for both the higher amp rating and data log capability over the YGE 60a. I have a separate BEC, and external phase sensor so I can continue to run the IKON governor.
Any suggestions or tricks would be great. I would love to find out I could somehow use the internal phase sensor to hook to my FBL.

Sometimes referred to as simply 80a-6s Data Log Esc, Can also be had as a Pro Modeler re-brand. I have the usb - link and have hooked it to my laptop and checked settings pretty simple program a bit buggy but otherwise ok.

Thanks
DeeBee

[mdhelicopters]

The esc you have does not have in internal rpm/phase sensor for use with external govs, so the use of an external phase sensor would be necessary.

That esc also uses a different version of the pc software for programming/data logging then the KKIII esc's.

There is a new 100A 6s KKIII Pro coming very very soon that uses the new v5.0 software and is able to use the new wifi dongle as well.

[deebee]

Sounds like the KKIII would be a nice one to have.
I do have a HW phase sensor handy. Its's a shame there is no easy way to hack into the signal of the internal sensor. Oh well at least I will be able to solder on the phase sensor and bec power lead at the same time as the motor plugs and EC5 connector