Replacing ESCs fix flip over problem?

[stevespirosezgoin81]

Has anybody had their Hypers flip over for no reason? Mine has , and I showed the video to the Owner of AF at IRCHA, and he said it was an ESC issue. Has anybody replaced theirs, and had the problem fixed?

[canadianmulti]

Lots of us have done it

[Carder]

I replaced mine when it fail on first flight two times
Replaced it got five flight then a different esc failed
Sent back and Heliderict replaced with brand new quad

The second one has been fine got about 25 flights so far with out any problem

[stevespirosezgoin81]

Steve le, and Brian Dang from AF , and helidirect have agreed to have me send mine in to Helidirect. I don't know if they are replacing it, or reparing it. I got two new ESCs, and I guess my Soldering iron couldn't get hot enough to wet the pads, so I couldn't replace them, and I also orderd a new FC just to be safe. I recieved one that had straight pins, and yes it was one from AF, and not just a randon Naze32. So I am excited to get a Hyper that is flyable. I flew one recently that worked properly, and it was a blast. I know for sure that there is something wrong with mine. On mine, when I flip it over it shoots all over the place. I have to say thanks to Steve and Brian for helping me out with this.

[pazza]

Yeah mine did also. Perfect in acro mode but soon as angle or horizon was enabled it flipped over. Replaced board and was fixed. Just got warranty on the board also. Took about 12 emails but all is good. I still have the calibrating ESC problem but I think it's either motor 1 or ESC 1. Also got a good deal from aerial freaks for the motor and ESC. I bought several.

Other then that it flies terrific esp with leap 450 blades. Getting some serious flight times on 2600 mah batts

[RichKnapp]

Originally Posted by pazza

Yeah mine did also. Perfect in acro mode but soon as angle or horizon was enabled it flipped over. Replaced board and was fixed. Just got warranty on the board also. Took about 12 emails but all is good. I still have the calibrating ESC problem but I think it's either motor 1 or ESC 1. Also got a good deal from aerial freaks for the motor and ESC. I bought several.

Other then that it flies terrific esp with leap 450 blades. Getting some serious flight times on 2600 mah batts

I'm going to have to check this on wifes. Wife freaked and landed on first hover. Before next one I set up B/O and now it wants to self distrust even before lift off.

EDIT: Nope made no difference for hers. We have NO left stick we found though.