setting up 4g3 w/2801 Pro

[3d-wanna-b]

I'm trying to set up the heli but when I bind in the 2601 mode I cant get to all the settings I need. I can set it up in the 2801 mode and I can get to everything I need but my swash does not move correctly no matter how I set the norm & rev settings in the radio. My receiver is the heli-max 2600. any ideas on how to set it up??

[Silverexpress01]

my prior info presented was deemed inaccurate - I removed it.

[blueindian]

what a lame thread I wish they got verified and move to top in searches like utorrent... this was my first one its gonna be a fun journey to get the simple answer Im sure.

[john aeras]

Originally Posted by blueindian

what a lame thread I wish they got verified and move to top in searches like utorrent... this was my first one its gonna be a fun journey to get the simple answer Im sure.

...!??

[Dusty1000]

Originally Posted by john aeras

...!??

+1

[pitchp]

Originally Posted by Dusty1000

+1

There's always a first for everything

[stevec]

Have you tried setting the swash mix to the opposite of what it is now?
If it is set to 80 across the board then try setting it to -80 if you just do one at a time you can isolate which is which. You use servo reverse to get all the servos moving in unison you reverse pitch elev or swash to get them going in the right direction...

Hope this helps
Steve